We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing 90-degree long radius elbow with sweat connections

Nibco, Inc.

Nibco, Inc. 607LTR Copper Reducing 90 Deg Long Radius Elbow 1 x 3/4

SKU CH-9F60-2EAGT

Connects 1-inch and 3/4-inch copper tubes at a 90-degree long-radius bend for air, gases or potable water up to 395 psi at 200 degrees F

  • Reduces 1 in to 3/4 in copper tube with long radius 90 bend
  • Sweat cup connections on both ends for secure soldered joints
  • Wrot copper construction handles 395 psi at 200 degrees F
  • Rated for continuous service up to 400 degrees F
  • Suitable for air, gases and potable water systems

Copper Reducing 90-Degree Elbow

The Nibco 607LTR is a wrot copper sweat fitting that joins 1-inch and 3/4-inch copper tube. It changes direction by 90 degrees using a long-radius bend for smoother flow. The fitting handles air, gases and potable water in plumbing and mechanical systems.

Verify tube size and pressure rating

Confirm that both pipe ends match the 1 1/8-inch and 7/8-inch outer diameters before ordering. The joint is rated for 395 psi at 200 degrees F and a maximum temperature of 400 degrees F. Ensure your system design stays within these limits.

Sweated joints handle heat and pressure

The copper construction conducts heat efficiently during soldering and in service. No moving parts means silent operation under normal flow conditions. The long-radius profile reduces turbulence and pressure drop compared with short-radius alternatives.

Highlights

  • Reduces 1 in to 3/4 in copper tube with long radius 90 bend
  • Sweat cup connections on both ends for secure soldered joints
  • Wrot copper construction handles 395 psi at 200 degrees F
  • Rated for continuous service up to 400 degrees F
  • Suitable for air, gases and potable water systems

Specifications

BrandNIBCO

Questions about this item

Does the 607LTR elbow come with flux, solder or any installation hardware, or are those purchased separately?

The fitting is supplied as a single wrot copper elbow; flux, solder and any pipe preparation tools are not included and must be sourced separately.

When should I select the 1 x 3/4 size versus another diameter combination?

Choose this 1 x 3/4 reducing elbow when joining a 1 in copper tube to a 3/4 in copper tube in a 90 degree long radius turn; other size combinations are different products.

What does the 395 psi at 200 Degrees F rating mean for a potable water system?

It indicates the elbow can handle up to 395 psi working pressure at 200 Degrees F, well above typical residential water pressures and temperatures.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.