We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short copper elbow with rough 90-degree bends at both ends

Nibco, Inc.

Nibco, Inc. 60722 3/4" Copper 90 Degree Close Rough Elbow

SKU CH-WGF6-R36FX

3/4" copper 90-degree close rough elbow joins same-size tubing for air, gases or potable water up to 466 psi at 200°F

  • Sweat copper elbow joins 3/4" tube for air, gas or potable water lines
  • Wrot copper construction handles 466 psi at 200 °F continuous service
  • 90-degree close rough profile routes tight turns in confined spaces
  • Both ends FTG type with 7/8" outer diameter for direct sweat connections
  • Rated to 400 °F maximum operating temperature for high-heat applications

Copper 90 Degree Close Rough Elbow

This Nibco 60722 fitting connects two 3/4 inch nominal copper tubes in a 90 degree turn. It is designed for sweat soldering on both ends and suits air, gases and potable water systems.

Sustained pressure and temperature limits

The wrot copper body is rated for 466 psi at 200 degrees F and a maximum operating temperature of 400 degrees F. These limits apply to continuous service rather than brief peaks.

Thermals and installation impact

Copper conducts heat rapidly so the joint reaches system temperature quickly during operation. The close rough profile keeps the assembly compact inside walls or cabinets without adding noticeable flow restriction.

Highlights

  • Sweat copper elbow joins 3/4" tube for air, gas or potable water lines
  • Wrot copper construction handles 466 psi at 200 °F continuous service
  • 90-degree close rough profile routes tight turns in confined spaces
  • Both ends FTG type with 7/8" outer diameter for direct sweat connections
  • Rated to 400 °F maximum operating temperature for high-heat applications

Specifications

BrandNIBCO

Questions about this item

Does the 90-degree close rough elbow generate noise, heat or draw power when installed in a line running all day?

The fitting is a passive copper sweat elbow with no moving parts, so it produces no noise, no heat and consumes no power during continuous operation.

What existing pipe or tubing must I already have to sweat this 3/4-inch copper elbow into place?

You need 3/4-inch nominal copper tube with a 7/8-inch outer diameter on both sides to make the sweat connections.

Will the NIBCO 60722 elbow mate with older 3/4-inch copper pipe already in the wall?

Yes, it fits standard 3/4-inch nominal copper tube (7/8-inch OD) and is rated to 466 psi at 200 °F and 400 °F maximum, matching legacy copper plumbing specifications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.