We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small straight copper adapter with smooth metallic finish

Nibco, Inc.

Nibco, Inc. 6032 1/4 in Copper Adapter FTG x FNPT

SKU CH-7455-H65Q2

A 1/4-inch copper sweat adapter with FTG-to-FNPT threads rated for 729 psi at 200°F and 400°F maximum temperature

  • Wrot copper construction resists corrosion for long service life
  • Straight adapter connects 1/4 in FTG to 1/4 in FNPT for sweat fitting joints
  • Rated to 729 psi at 200 °F for air, gases and potable water systems
  • Withstands continuous temperatures up to 400 °F in demanding plumbing applications
  • Model 6032 provides a reliable transition between copper tube and threaded pipe

Quarter-Inch Copper Adapter

The NIBCO 6032 connects a quarter-inch copper tube to a quarter-inch female NPT thread in air, gas or potable-water systems. It is sized for a tube outer diameter of three-eighths inch and rated for 729 psi at 200 degrees Fahrenheit. Installers needing a straight sweat-to-thread transition use this fitting.

Pressure And Temperature Headroom

The adapter holds 729 psi at 200 degrees Fahrenheit and withstands continuous temperatures up to 400 degrees Fahrenheit. This range covers typical residential and light-commercial plumbing loads. Systems that exceed either limit require a different fitting class.

Wrot Copper Construction

The wrot copper body provides corrosion resistance and allows direct soldering to the tube end without additional couplings. No gaskets, sealants or special tools are bundled; the installer supplies flux, solder and a torch. The straight shape keeps the joint compact in tight runs.

Highlights

  • Wrot copper construction resists corrosion for long service life
  • Straight adapter connects 1/4 in FTG to 1/4 in FNPT for sweat fitting joints
  • Rated to 729 psi at 200 °F for air, gases and potable water systems
  • Withstands continuous temperatures up to 400 °F in demanding plumbing applications
  • Model 6032 provides a reliable transition between copper tube and threaded pipe

Specifications

BrandNIBCO

Questions about this item

Will the 1/4 in copper tube size fit the 1/4 in piping I already have?

Side A accepts 1/4 in copper tube with a 3/8 in outer diameter, while Side B is a 1/4 in FNPT thread for standard pipe connections.

How can I verify the joint is holding at the rated 729 psi?

Pressurise the system and check for leaks; the adapter is rated for 729 psi at 200 °F and 400 °F maximum temperature.

Does the 6032 adapter come with any sealant or solder?

The box contains only the wrot copper straight adapter; flux, solder or thread sealant must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.