We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing bushing, 1-1/4 by 1 inch, smooth metallic finish

Nibco, Inc.

Nibco, Inc. 600-2 Wrot Copper Reducing Bushing 1-1/4" x 1

SKU CH-327F-P5VKX

Wrot copper reducing bushing connects 1-1/4" to 1" tube, rated 439 psi at 100°F and tested from -20°F to 400°F

  • TypePlumbing & Pipe Fittings
  • Reduces pipe diameter with a 1-1/4 in x 1 in wrot copper fitting
  • Handles up to 439 psi at 100 Degrees F for demanding installations
  • Operates reliably from -20 Degrees to 400 Degrees F across wide temperature ranges
  • Meets ASME/ANSI B 16.22 standards for code-compliant plumbing connections
  • FTG x C connection type allows direct soldering to copper tube and fitting sockets

Copper Reducing Bushing 1-1/4" x 1

This wrot copper reducing bushing connects a 1-1/4 inch tube to a 1 inch tube using an FTG by C fitting connection. It is designed for plumbing and pipe fitting installations that require a durable, corrosion-resistant transition between two different tube sizes.

Thermals Noise and Power Draw

The fitting operates passively with no moving parts, so it produces no noise and draws no power. It is rated for a temperature range of -20 Degrees to 400 Degrees F and a maximum pressure of 439 psi at 100 Degrees F, meeting ASME/ANSI B 16.22 standards for reliable performance in normal plumbing use.

Sustained Load Behaviour

Under sustained pressure and temperature conditions within the rated limits, the wrot copper construction maintains its structural integrity without deformation or leakage. The material resists thermal cycling and continuous exposure to hot water or steam up to 400 Degrees F, providing a permanent joint that does not fatigue over time.

Highlights

  • Reduces pipe diameter with a 1-1/4 in x 1 in wrot copper fitting
  • Handles up to 439 psi at 100 Degrees F for demanding installations
  • Operates reliably from -20 Degrees to 400 Degrees F across wide temperature ranges
  • Meets ASME/ANSI B 16.22 standards for code-compliant plumbing connections
  • FTG x C connection type allows direct soldering to copper tube and fitting sockets

Specifications

TypePlumbing & Pipe Fittings
BrandNibco

Questions about this item

How do you solder the 1-1/4" x 1" wrot copper bushing without overheating the joint?

Clean both tube ends, apply flux, insert the 1-1/8" tube fully into the cup, heat the fitting evenly until solder flows by capillary action, then wipe excess while warm; overheating burns the flux and creates voids.

What upkeep does the copper reducing bushing require after installation?

No routine maintenance is needed; inspect joints periodically for green corrosion or seepage, and replace the fitting only if a leak develops or the system is altered.

At what temperature does the 439 psi pressure rating begin to drop for this bushing?

The 439 psi rating applies at 100 °F; above that temperature the allowable working pressure decreases until the 400 °F upper limit of the fitting's range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.