SonicWall 01-SSC-1445 Capture Advanced Threat Protection hardware license
- Capture Advance Thr…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Six-port unmanaged switch with two 10Gb RJ45 uplinks and four 2.5Gb RJ45 ports, 60Gbps non-blocking capacity, fanless metal housing, plug-and-play
The NETGEAR ProSafe SFP-P4810k-G2-001 is a fanless metal switch with six RJ45 ports. Four ports operate at up to 2.5 Gbps and two uplink ports operate at 10 Gbps. It targets homes and small offices connecting NAS devices, access points and PCs that need multi-gigabit wired links without configuration.
A 60 Gbps non-blocking fabric sustains full wire speed on every port simultaneously under continuous load. Jumbo frame support up to 9216 bytes reduces per-packet overhead during large file transfers and 4K or 8K streaming. The passive design eliminates moving parts, so thermal throttling or fan noise never interrupts long-running workloads.
The switch requires no software setup, VLAN configuration or SNMP management. It auto-negotiates 10, 100, 1000 Mbps, 2.5 Gbps and 10 Gbps speeds on each port. Buyers who need managed features such as port mirroring, link aggregation or remote monitoring should select a managed model instead.
| Brand | NETGEAR |
|---|---|
| Series | ProSafe |
| Part Number | SFP-P4810k-G2-001 |
| Standards | Passive PoE |
| Network Media | RJ45 |
| Uplink Interface | RJ45 |
| Uplink Speed | 10/100 Mbps |
| Uplink Speed/Type | RJ45 |
| Primary Port Count | 6 |
| Primary Ports | 16 x SFP + 8 x RJ45 |
| Primary Port Speed | 10/100Mbps + 1000Mbps |
| Primary Port Type | RJ45 |
| Management Interface | RJ45 |
| Jumbo Frames | 9216 bytes |
| Packet Forwarding Rate | 60 gigabits_per_second |
| SNMP | No |
| Layer 2 Features | RJ45, 60 gigabits_per_second, 6 |
| Layer 3 Features | 8 Port Gigabit Managed PoE Switch |
| Cabling | RJ45 |
| Certification | not_applicable |
| Features | 6, RJ45, 60 gigabits_per_second, Black |
The switch is fanless and built with a metal enclosure that acts as a heatsink; its 60 Gbps non-blocking capacity is designed for sustained 2.5G and 10G traffic without active cooling.
You need Cat 5e or better Ethernet cables and devices with 2.5G or 10G RJ45 network interfaces such as a 2.5G NAS, 10G server or 2.5G PCIe adapter.
Each port auto-negotiates independently at 10/100/1000 Mbps or 2.5G/10G, so legacy 1 Gbps gear runs at its own speed without dragging down the faster links.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?