We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white IP66 outdoor PoE switch with six ports and wall-mount tabs

NETGEAR ProSafe POE-F042FO 6-port outdoor PoE+ network switch 4×30 W 78 W 250 m IP66

SKU CH-G4FJ-A634D MPN POE-F042FO

Six-port unmanaged outdoor switch with four PoE+ ports delivering up to 30 W each and a 78 W total budget

  • Network Management TypeUnmanaged
  • Primary Port Count6
  • Primary Ports16 x SFP + 8 x RJ45
  • Management Featureoutdoor poe switch
  • Jumbo Frames9216 bytes
  • Packet Forwarding Rate0.1 gigabits_per_second
  • Delivers up to 30 W per PoE+ port for power-hungry cameras
  • IP66-rated sealed chassis withstands rain, dust and snow outdoors
  • Extends PoE connections to 250 m with long-range mode enabled
  • Fanless, unmanaged design powers up instantly with zero configuration
  • Six-port layout includes four PoE+ and two uplink connections

Outdoor PoE+ switch for IP cameras

The POE-F042FO is a six-port 10/100 Mbps Ethernet switch built for outdoor surveillance. Four ports deliver IEEE 802.3af/at PoE+ power while two uplink ports connect to routers or NVRs. The unmanaged design requires no configuration and works with both PoE and non-PoE devices.

Fanless silent operation with 78 W budget

A sealed IP66-rated ABS and PC enclosure protects the internal power supply from water, dust and snow. The fanless chassis runs silently and handles the full 78 W PoE budget across the four powered ports, each limited to 30 W. Operating temperatures and vibration tolerance meet industrial requirements for exposed locations.

Pole or wall mount with 250 m reach

Mounting brackets on the rear support pole and wall installation without extra hardware. An extension toggle activates long-range transmission up to 250 m on the PoE ports, while a second toggle enables port isolation to prevent broadcast storms. Jumbo frames up to 9216 bytes pass through all six ports.

Highlights

  • Delivers up to 30 W per PoE+ port for power-hungry cameras
  • IP66-rated sealed chassis withstands rain, dust and snow outdoors
  • Extends PoE connections to 250 m with long-range mode enabled
  • Fanless, unmanaged design powers up instantly with zero configuration
  • Six-port layout includes four PoE+ and two uplink connections

Specifications

BrandNETGEAR
SeriesProSafe
Network Management TypeUnmanaged
Primary Port Count6
Primary Ports16 x SFP + 8 x RJ45
Management Featureoutdoor poe switch
Jumbo Frames9216 bytes
Packet Forwarding Rate0.1 gigabits_per_second
SNMPNo
Layer1
Layer 2 Features0.1 gigabits_per_second, 6
Layer 3 Features4 POE + 2 FE
Certificationnot_applicable
Features6, outdoor poe switch, 0.1 gigabits_per_second
Package Contentsoutdoor poe switch

Questions about this item

How do I mount the POE-F042FO and which step is often missed?

Use the included brackets for pole or wall mounting; the step often missed is toggling the extension switch on the chassis to enable 250 m long-range PoE on ports 1–4.

What maintenance will the POE-F042FO need over time?

The fanless, sealed IP66 chassis has no filters or moving parts; occasional visual checks of cable glands and vent surfaces are the only upkeep required.

What is the first limit reached when all four PoE+ ports run at 30 W continuously?

The 78 W total power budget is reached first, so sustained full-load operation on every port simultaneously will exceed the switch’s capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.