We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack-mount switch, 24 RJ45 ports and four SFP+ cages on the front

Netgear Inc.

Netgear Inc. MSM4332-100NES M4350-24M4X4V 28-port managed network switch

SKU CH-6N6W-M8P4T MPN MSM4332-100NES

28-port managed switch with 24 multi-gigabit RJ45 ports up to 2.5 Gbps, four 10 Gbps SFP+ uplinks, PoE, Layer 3 routing and stacking in a 1U rack-mountable chassis

  • FormatRack-mountable
  • Standards2.5GBase-T, 1000Base-T, 5GBase-T, 10GBase-T, 10GBase-X, 25GB
  • Network MediaOptical Fiber, Twisted Pair
  • Network Management TypeManaged
  • Primary Ports24 x RJ45 + 4 x SFP+
  • Primary Port Speed2.5 Gbps + 10 Gbps
  • 28 ports support 2.5 Gbps to 25 Gbps multi-gigabit speeds
  • 24 RJ45 ports plus 4 SFP+ uplinks handle copper and fiber links
  • 522 W PoE budget powers cameras and access points across all ports
  • Full Layer 3 routing and VLANs segment traffic for security and performance
  • Stackable design lets multiple units operate as a single logical switch

28-port multi-gigabit managed switch

The Netgear M4350-24M4X4V delivers 24 RJ45 ports at 2.5 Gbps plus four SFP+ uplinks at 10 Gbps. It supports 2.5GBase-T, 5GBase-T, 10GBase-T and 25GBase-X standards over twisted pair and optical fibre. Full Layer 3 routing, VLANs and 9216-byte jumbo frames suit AV-over-IP, campus and data-centre deployments.

Rack-mountable 1U form factor with PoE+

The 1U chassis fits standard racks and provides a 522 W PoE budget for access points, cameras and VoIP phones. Stackable design allows multiple units to operate as a single logical switch. Management is handled through web, CLI or SNMP interfaces without requiring proprietary controllers or additional licence keys.

123.4 W typical power draw

The switch consumes 123.40 W under normal load while powering attached PoE devices. Fan speed scales with internal temperature to keep acoustic output low in typical rack environments. No external power supply is needed; the unit connects directly to AC mains.

Highlights

  • 28 ports support 2.5 Gbps to 25 Gbps multi-gigabit speeds
  • 24 RJ45 ports plus 4 SFP+ uplinks handle copper and fiber links
  • 522 W PoE budget powers cameras and access points across all ports
  • Full Layer 3 routing and VLANs segment traffic for security and performance
  • Stackable design lets multiple units operate as a single logical switch

Specifications

BrandNETGEAR
ModelM4350-24M4X4V
Part NumberMSM4332-100NES
FormatRack-mountable
Standards2.5GBase-T, 1000Base-T, 5GBase-T, 10GBase-T, 10GBase-X, 25GBase-X
Network MediaOptical Fiber, Twisted Pair
Network Management TypeManaged
Primary Ports24 x RJ45 + 4 x SFP+
Primary Port Speed2.5 Gbps + 10 Gbps
VLAN SupportYes
Jumbo Frames9216 bytes
PoEYes
StackableYes
LayerFull Layer 3
Shipping weight10.12 kg
Package size599 × 577 × 124 mm

Questions about this item

How much PoE power can the 28-port switch deliver before the 522 W budget is reached?

The switch provides a 522 W PoE budget across its 24 multi-gigabit RJ45 ports, so the limit is reached when connected devices draw that total power.

What is the power draw and acoustic profile when the M4350-24M4X4V runs continuously at full load?

Continuous operation draws 123.40 W; the 1U rack-mount chassis uses internal cooling fans sized for that thermal load.

Which SFP+ modules and cables are required to use the four 10 Gbps uplink ports?

The four SFP+ ports accept standard 10GBase-X transceivers or direct-attach cables for fiber or copper uplinks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.