We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Netgear Inc.

Netgear Inc. GS510TPP-100NAS 8-Port Gigabit PoE+ Smart Switch 190W

SKU CH-3SS5-XN9Z9 MPN GS510TPP-100NAS

Eight-port Gigabit smart switch with 190 W PoE+ budget, two SFP uplinks and Layer 3 static routing

  • FormatRack-mountable Desktop
  • Network MediaMedia Type Supported: Twisted Pair Optical Fiber Ethernet Te
  • Network Management TypeSmart
  • Uplink PortsTotal Number of Expansion Slots: 2 Expansion Slot Type: SFP
  • Primary Ports8 x RJ45 + 2 x SFP
  • Primary Port Speed10/100/1000Mbps

Class 10 Ports 8 x PoE+ 190W 2 x SFP

  • 190W PoE+ budget powers eight devices simultaneously
  • Two dedicated SFP uplinks enable fibre backbone links
  • Smart management with VLAN, QoS and LACP control
  • Layer 3 static routing supports 32 IPv4 and IPv6 routes
  • Whisper-quiet fan design suits office or rack deployment

8-Port Gigabit PoE+ Smart Switch

The Netgear ProSafe GS510TPP-100NAS is an 8-port Gigabit Ethernet switch with 2 dedicated SFP uplink ports. It delivers 190W of PoE+ power across all eight RJ45 ports for devices such as IP cameras, VoIP phones and wireless access points. The smart-managed operating system provides Layer 3 static routing, VLANs, QoS and SNMP control through a web GUI. It suits small-business networks that need powered ports and advanced traffic management without a full Layer 3 chassis.

190W PoE budget and Layer 3 routing

The 190W PoE+ budget supports up to 30W per port for high-draw endpoints such as PTZ cameras or Wave 2 access points. Layer 3 static routing handles 32 IPv4/IPv6 routes for inter-VLAN traffic, while the 16K MAC table and 1.5MB buffer absorb bursty loads. Jumbo frames up to 9KB reduce overhead on storage or backup flows. The switch runs out of PoE headroom if every port draws maximum power simultaneously, and the 32-route table limits complex multi-site topologies.

Rack or desktop mounting with dual SFP uplinks

The chassis includes brackets for 19-inch rack mounting or desktop placement, and ships with all required hardware. Two dedicated SFP slots accept fiber or copper transceivers for uplinks to a core switch or router, freeing all eight RJ45 ports for powered endpoints. Fan noise is kept low for office environments, and per-port LEDs show speed, link and activity at a glance. Builds that need more than two uplinks or a higher PoE budget will require a larger switch.

Highlights

  • 190W PoE+ budget powers eight devices simultaneously
  • Two dedicated SFP uplinks enable fibre backbone links
  • Smart management with VLAN, QoS and LACP control
  • Layer 3 static routing supports 32 IPv4 and IPv6 routes
  • Whisper-quiet fan design suits office or rack deployment

Specifications

BrandNETGEAR
SeriesProSafe
Part NumberGS510TPP-100NAS
FormatRack-mountable
Desktop
Network MediaMedia Type Supported:
Twisted Pair
Optical Fiber
Ethernet Technology:
Gigabit Ethernet
Network Technology:
1000Base-T
1000Base-X
Network Management TypeSmart
Uplink PortsTotal Number of Expansion Slots:
2
Expansion Slot Type:
SFP
Shared SFP Slot:
No
Number of SFP Slots:
2
Primary Ports8 x RJ45 + 2 x SFP
Primary Port Speed10/100/1000Mbps
MAC Address Table16K
VLAN Support256 VLANs
Jumbo Frames9KB
Buffer Memory1.5MB
PoE8 PoE+ (190W PoE budget)
SNMPYes
QoSYes
LACPYes
Layer3
Port MirroringYes
LEDsPer port: Speed, Link, Activity
Per device: Power and Fan
Power1 internal PSU, fixed
TemperatureOperating temperature: 0° to 50°C (32° to 122°F)
Storage temperature: -20° to 70°C (-4° to 158°F)
HumidityOperating Humidity (relative): 90% maximum relative humidity (RH), non-condensing
Storage Humidity (relative): 95% maximum relative humidity, non-condensing
FeaturesSmart Managed switch with 190W PoE budget available across 8 Gigabit PoE+ ports (802.3at)
2 dedicated Gigabit SFP fiber ports for aggregation to your network core
Quiet desktop operation or rack mounting with max. 32dB at 25 degree C (77 degree F) ambient
Advanced Smart features include Layer 3 static routing with 32 routes (IPv4 and IPv6)
Easy-to-use Web browser-based management GUI, no need for an IT expert
Package ContentsProSAFE 8-Port PoE+ Gigabit Smart Managed Switch with 2 SFP Ports (GS510TPP)
Regional power cord(s)
Rubber caps for the SFP sockets
Rack-mounting kit
Rubber footpads for tabletop installation
Quick installation guide
Resource CD with NETGEAR Smart Control Center utility,and links to the support website where you can download additional documentation including the Web browser-based management GUI User Manual and product datasheet
Shipping weight9.53 kg
Package size483 × 279 × 254 mm

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the GS510TPP-100NAS work with my existing 10/100 devices?

The 8 RJ45 ports auto-negotiate at 10/100/1000 Mbps, so legacy 10/100 endpoints connect without configuration.

How can I confirm the 190 W PoE budget is delivering power correctly after installation?

Per-port Speed, Link and Activity LEDs plus the device Power and Fan LEDs give immediate visual status; the management GUI also reports real-time PoE draw per port.

Does the box include SFP transceivers for the two uplink slots or must I purchase them separately?

The package supplies the switch, rack-mount brackets and desktop feet; SFP modules for the two dedicated SFP ports are not included and must be bought separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.