We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC ball valve with tee handle and threaded ends

NDS

NDS E1420-15 Ball Valve 1-1/2" PVC 150 psi

SKU CH-RQ15-CDN3V

A 1-1/2 inch PVC ball valve with FNPT connections rated for 150 psi and temperatures up to 120 degrees F

  • PVC body resists corrosion in irrigation systems
  • 150 psi rating handles standard water pressure
  • 1-1/2 inch FNPT connections fit common piping
  • Full T-port design allows unrestricted flow
  • Operates reliably from 0 to 120 degrees F

NDS 1-1/2" PVC Ball Valve

The NDS E1420-15 is a 2-way, 1-piece PVC ball valve designed for irrigation and grounds maintenance systems. It features FNPT x FNPT connections sized for 1-1/2 inch pipe and a full T-port for unrestricted flow. The tee handle allows for quick manual operation in outdoor environments.

150 psi Pressure Rating and Temperature Limits

This valve handles a maximum working pressure of 150 psi CWP and operates within a temperature range of 0 to 120 degrees F. The PVC body, ball, and stem resist corrosion in water applications, while Buna-N seats and seals provide reliable shutoff. It is not suited for pressures above 150 psi or temperatures exceeding 120 degrees F.

Replaces Worn or Leaking Irrigation Valves

This valve serves as a direct replacement for failed 1-1/2 inch FNPT ball valves in existing manifolds. The jump is worth it when the original valve leaks, seizes, or cracks from UV exposure. It does not adapt to solvent-weld, compression, or flanged connections without additional fittings.

Highlights

  • PVC body resists corrosion in irrigation systems
  • 150 psi rating handles standard water pressure
  • 1-1/2 inch FNPT connections fit common piping
  • Full T-port design allows unrestricted flow
  • Operates reliably from 0 to 120 degrees F

Specifications

BrandNDS

Questions about this item

Will the 1-1/2" FNPT x FNPT connections on this NDS ball valve fit my existing PVC piping?

The valve uses 1-1/2 inch FNPT threads on both ends. Match these to your pipe's male NPT threads and use a compatible sealant for a watertight joint.

How can I verify the 150 psi CWP rating is holding after I install the valve?

Pressurise the system up to 150 psi at ambient temperature. Inspect the Buna-N body seals and stem area for leaks while the tee handle is fully open and fully closed.

Does the box include any pipe sealant or thread tape for the FNPT connections?

The valve ships as a single 1-piece PVC body with tee handle installed. Sealant or PTFE tape for the FNPT threads must be purchased separately.

More in Manifolds & Valves

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.