We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC ball valve with tee handle and IPS connections

NDS

NDS E1410-15 Ball Valve PVC 1-1/2 in 150 psi

SKU CH-YTG7-TM8WF

PVC ball valve with IPS connections handles 150 psi water pressure up to 120 degrees Fahrenheit

  • Full-flow 2-way design directs water efficiently
  • PVC body and ball resist corrosion in irrigation systems
  • Buna-N seals and seats maintain tight shut-off at 150 psi
  • Tee handle allows quick quarter-turn operation with gloved hands
  • Rated for continuous use from 0 to 120 °F

Product identity

The NDS E1410-15 is a 1-1/2 inch PVC ball valve designed for irrigation and grounds maintenance systems. It suits installers who need a straightforward shut-off component for IPS piping.

Thermals noise and power

The valve body and ball are PVC with Buna-N seats and seals, rated for 150 psi CWP across a temperature range of 0 to 120 degrees F. Operation is manual via a PVC tee handle, so there is no electrical draw or acoustic output.

Upgrade context

This valve replaces a worn or leaking manual valve in an existing 1-1/2 inch IPS line where a full-port, 2-way configuration is required. The jump is worth it when the current fitting cannot hold the rated pressure or when the handle style needs to match the surrounding hardware.

Highlights

  • Full-flow 2-way design directs water efficiently
  • PVC body and ball resist corrosion in irrigation systems
  • Buna-N seals and seats maintain tight shut-off at 150 psi
  • Tee handle allows quick quarter-turn operation with gloved hands
  • Rated for continuous use from 0 to 120 °F

Specifications

BrandNDS

Questions about this item

How do I install the NDS E1410-15 ball valve on IPS piping and what step is often missed?

Solvent-weld each IPS socket to 1-1/2 in PVC pipe using primer and cement; the step often missed is allowing the joint to cure fully before pressurising to 150 psi.

Which seals on this valve will need replacement first during maintenance?

The Buna-N seats and body seals are the wear items; they should be inspected periodically and replaced if leakage appears at the stem or ports.

What temperature limit will be reached first if this valve runs continuously at high pressure?

The 120 °F maximum temperature rating is the limiting factor; sustained operation above this temperature can degrade the PVC body and Buna-N seals.

More in Manifolds & Valves

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.