NALYD
NALYD Graphene Copper Heatsink M.2 2280 NVMe Thermal Pad
Graphene-copper heatsink for M.2 2280 NVMe drives, 67×18 mm in five thicknesses from 1.5 to 6 mm
- TypeStorage Sheds
- Graphene conducts heat at 5300 W/m·K for far cooler SSD operation
- Pure copper base adds 386.4 W/m·K conductivity to spread heat quickly
- Five thickness options from 1.5 mm to 6 mm fit any M.2 2280 slot
- Adhesive backing allows tool-free installation on laptops or desktops
- Lower drive temperatures reduce throttling and extend hardware lifespan
Graphene Copper M.2 2280 Heatsink
This NALYD heatsink combines pure copper with graphene to draw heat away from M.2 2280 NVMe modules. The graphene layer reaches a thermal conductivity of 5300W/m.K, far above copper alone at 386.4W/m.K. It suits desktop PCs, laptops and notebooks that need cooler storage operation. Buyers who need active cooling with a fan or liquid loop should look elsewhere.
Adhesive Mount in Five Thickness Options
A pre-applied sticker makes installation a matter of aligning and pressing the pad onto the controller or NAND. Five optional heights are offered: 1.5mm, 2mm, 3mm, 4mm and 6mm, each 67mm long by 18mm wide. Choosing a thickness taller than the available clearance between the drive and motherboard or chassis will prevent the board from seating. No screws or thermal paste are included.
Sustained Load Heat Spreading
Under continuous read or write workloads the graphene-copper composite spreads heat across its 67x18mm surface faster than aluminium at 237W/m.K. Lower controller temperatures reduce thermal throttling so the drive maintains its rated speed for longer periods. The pad is passive, so case airflow still determines the final equilibrium temperature. No power connection or software control is required.
Highlights
- Graphene conducts heat at 5300 W/m·K for far cooler SSD operation
- Pure copper base adds 386.4 W/m·K conductivity to spread heat quickly
- Five thickness options from 1.5 mm to 6 mm fit any M.2 2280 slot
- Adhesive backing allows tool-free installation on laptops or desktops
- Lower drive temperatures reduce throttling and extend hardware lifespan
Specifications
| Type | Storage Sheds |
|---|
Questions about this item
How can I verify the heatsink is working after installing it on my M.2 2280 NVMe drive?
Use temperature monitoring software to check the SSD temperature before and after fitting the 67x18mm graphene copper pad; a lower reading confirms it is dissipating heat as intended.
What comes in the box and what must I supply myself?
The package contains one 1 pc heatsink in your chosen thickness — 1.5, 2, 3, 4 or 6 mm — with an adhesive sticker already attached; no mounting screws or extra thermal paste are included.
Which thickness option — 1.5, 2, 3, 4 or 6 mm — should I pick for my laptop or desktop?
Measure the gap between your M.2 2280 NVMe drive and the chassis or cover; choose the thinnest option that still makes firm contact, typically 1.5 mm for tight ultrabooks and up to 6 mm for desktops with more clearance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
