NALYD
NALYD 2.5" SATA SSD PCI Bracket 1-3 Drives
A PCI-slot bracket that holds one to three 2.5-inch SATA SSDs, adding storage capacity without using drive bays and supporting 750 MB/s transfer speeds
- TypeStorage Sheds
- Adds 1-3 2.5" SATA drives via unused PCI slot
- SATA III cable supports up to 750 MB/s throughput
- Fits full-height and half-height chassis brackets
- Frees internal drive bays for better cable routing
- 100% brand-new bracket built for DIY storage expansion
PCI SATA Bracket for 2.5" Drives
This bracket mounts one to three 2.5 inch SATA SSDs into a standard PCI expansion slot. It is built for desktop and HIPC users whose chassis lack dedicated 2.5 inch drive bays. The assembly uses the otherwise unused PCI opening to add storage capacity without modifying the case.
Sustained Transfer via SATA III
The included cables support third generation SATA with a theoretical maximum bandwidth of 750 MB per second. High quality connectors maintain consistent throughput during extended read or write sessions. Backward compatibility ensures operation with older SATA revisions at their native speeds.
Check Slot Clearance and Drive Count
Verify that a full height or half height PCI slot is physically free and not blocked by other expansion cards. Confirm the power supply has enough spare SATA power connectors for the number of drives you plan to install. Ensure the operating system can recognise the additional SATA devices.
Highlights
- Adds 1-3 2.5" SATA drives via unused PCI slot
- SATA III cable supports up to 750 MB/s throughput
- Fits full-height and half-height chassis brackets
- Frees internal drive bays for better cable routing
- 100% brand-new bracket built for DIY storage expansion
Specifications
| Type | Storage Sheds |
|---|
Questions about this item
How much power does the bracket draw when three 2.5" SATA drives run all day?
The bracket itself is passive and draws no power; each drive uses its own SATA power connector from your PSU, so total draw depends on the drives you install.
What must my motherboard provide for this bracket to work?
A free PCI expansion slot and standard SATA data cables from the board to the bracket; power comes from the PSU via SATA power leads.
Will my older SATA II drives work at full speed in this bracket?
Yes, the included SATA III cables are backward compatible, so SATA II drives operate at their native 3 Gb/s rate without any configuration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
