myVolts
myVolts KK LTD Fit Chicony A120A007L A12-120P1A 120W 19.5V 6.15A 5.5*2.5mm for MSI GE60 GE70
120W 19.5V 6.15A AC adapter with 5.5mm×2.5mm connector for MSI GE60 and GE70 gaming laptops
- 120W output powers demanding gaming laptops
- 5V 6.15A matches original Chicony A120A007L specification
- 5×2.5mm L-shape connector reduces cable strain
- 100-240V input works worldwide without a voltage converter
- Replaces ADP-180HB ADP-150NB ADP-120MH and 957-series part numbers
120W 19.5V AC adapter for MSI gaming laptops
This 120 watt power supply delivers 19.5 volts at 6.15 amps through a 5.5 by 2.5 millimetre L‑shaped connector. It accepts 100 to 240 volt input at 50 to 60 hertz for worldwide use. The unit is new and includes the AC power cord.
Suits owners of listed MSI
Compatible with MSI GE60, GE70, GP60, GP70, GS70, GL62, GV62, PE60, PE70, PX60 and many MS‑series chassis plus Clevo N151RF1, N170RF1, N850HK1, N857HK1, N870HK1, N870HP6. Not for laptops that require a different voltage, amperage or connector size.
5.5 mm by 2.5 mm L‑shaped output connector
The barrel plug measures 5.5 millimetres outer diameter by 2.5 millimetres inner diameter with an angled L‑shape that reduces cable strain. Verify your original adapter uses this exact connector before ordering.
Highlights
- 120W output powers demanding gaming laptops
- 5V 6.15A matches original Chicony A120A007L specification
- 5×2.5mm L-shape connector reduces cable strain
- 100-240V input works worldwide without a voltage converter
- Replaces ADP-180HB ADP-150NB ADP-120MH and 957-series part numbers
Specifications
No published specifications for this item yet.
Questions about this item
Which MSI laptop models share the 5.5*2.5 mm barrel connector used by this 120 W adapter?
The adapter fits MSI GE60, GE70, GL62M, GV62, GE62, GE72, GL62, GP60, GP62, GP70, GP72, GS70, PE60, PE70, PX60 and the listed MS-16 and MS-17 chassis codes.
Will this 19.5 V 6.15 A unit safely replace an original 180 W ADP-180HB brick on a GE70?
It supplies 120 W instead of 180 W, so the laptop will run but may not charge while under heavy load; the voltage and connector match the original specification.
How can I confirm the adapter is delivering 19.5 V at the 5.5*2.5 mm tip after plugging it in?
Measure the centre pin with a multimeter set to DC volts; a reading close to 19.5 V with no load shows the output is present and correct.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



