myVolts 90W AC Adapter 19V 4.74A 5.5×2.5mm for HP Compaq NX9000 NX9005 NX9010 ZE4328 N1050V

90W AC Adapter for HP Compaq Notebooks

This 90W AC adapter delivers 19V at 4.74A to compatible HP Compaq notebooks including the NX9000, NX9005, NX9010, ZE4328 and N1050V series. It accepts a universal AC input from 100 to 240V at 50 to 60Hz and connects via a 5.5×2.5mm barrel connector. The three-prong inlet and included power cord complete the charging kit. It is built for owners of these specific models who need a direct replacement power supply.

Sustained 90W delivery

The adapter is rated for continuous 90W output rather than a short-term peak, supported by CE and RoHS safety certifications. Protective circuits guard against over-voltage, over-current and short-circuit conditions during extended charging sessions. Stable 19V regulation is maintained across the full load range, so the notebook receives consistent power whether the battery is deeply discharged or near full. Thermal design keeps surface temperatures within safe limits under continuous operation.

Barrel connector and regional cord set

The 5.5×2.5mm centre-positive barrel plug defines which HP Compaq models can be powered; laptops with a different pin diameter or polarity will not connect. The three-prong AC inlet requires a matching earthed mains cord, and the bundled cord suits the destination market's wall sockets. Input voltage auto-ranges from 100 to 240V, so no manual switching is needed when travelling between regions. No USB-C or alternative output is provided, limiting use to the listed barrel-connector devices.