myVolts
myVolts 90W 19V 4.74A AC Adapter Laptop Charger
90W 19V 4.74A AC adapter with 5.0mm × 7.4mm DC connector powers compatible HP EliteBook, ProBook, Pavilion and Compaq laptops plus 18–32 inch All-in-One desktops
- 90 W output powers demanding HP laptops and all-in-ones
- 19 V 4.74 A matches original charger specifications exactly
- 100–240 V input works worldwide without a voltage converter
- 0 mm × 7.4 mm DC plug fits listed HP EliteBook, ProBook and Pavilion models
- CE, RoHS and FCC certified for electrical safety
Power for HP EliteBook and ProBook
This 90 W AC adapter delivers 19 V at 4.74 A for a wide range of HP EliteBook and ProBook laptops. It also supports HP Pavilion all-in-one desktops from 18 to 32 inches. The unit accepts 100-240 V input at 1.5 A for worldwide use.
Replacing a lost or failing 90 W brick
It replaces an original charger with the same 5.0 mm inner and 7.4 mm outer barrel dimensions. The upgrade is worthwhile when the old adapter shows intermittent charging, physical cable damage or no longer meets CE, RoHS and FCC safety marks.
Simple plug-and-play installation
Connect the supplied AC power cable, insert the barrel tip and power on. The most common issue is selecting a tip with the wrong inner or outer diameter, which prevents a secure fit. Verify the 5.0 mm and 7.4 mm measurements before ordering.
Highlights
- 90 W output powers demanding HP laptops and all-in-ones
- 19 V 4.74 A matches original charger specifications exactly
- 100–240 V input works worldwide without a voltage converter
- 0 mm × 7.4 mm DC plug fits listed HP EliteBook, ProBook and Pavilion models
- CE, RoHS and FCC certified for electrical safety
Specifications
No published specifications for this item yet.
Questions about this item
What DC connector dimensions does this charger use for the HP EliteBook 8460p?
The connector has a 5.0 mm internal diameter and a 7.4 mm external diameter, matching the barrel jack on the EliteBook 8460p.
How do I connect the included AC power cable to the adapter, and what mistake should I avoid?
Plug the IEC C13 end of the supplied cable into the adapter’s inlet, then into a 100-240 V outlet; do not force the DC barrel into the laptop port upside-down.
When should I consider replacing this 90 W adapter for my HP Pavilion 23" All-in-One?
Replace it if the output no longer holds 19 V at 4.74 A, the cable insulation cracks, or the unit becomes unusually hot during normal use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



