myVolts
myVolts 60W 12V 5A LCD Monitor AC Adapter 5.5x2.5mm
A 60 W AC adapter delivering 12 V at 5 A with a 5.5 × 2.5 mm barrel plug for compatible LCD monitors
- 60 W output powers compatible LCD monitors reliably
- 12 V 5 A delivery matches original adapter specifications
- 5 × 2.5 mm barrel connector fits listed models
- 100–240 V input enables worldwide use without a converter
- FCC CE RoHS certified for safety compliance
Compatible monitor power supply
This 60 W adapter delivers 12 V at 5 A through a 5.5 × 2.5 mm barrel connector. It replaces the original supply for a wide range of LCD monitors from brands including BenQ, Acer, AG Neovo, AOC and Sony. The unit accepts 100–240 V AC input at 50/60 Hz for worldwide use. A two-prong mains lead is included in the package.
Thermals noise and power draw
The adapter draws up to 1.5 A from the mains and converts it to 60 W of DC output with FCC, CE and RoHS certification. No fan is fitted, so operation is silent in normal use. Heat is dissipated through the sealed enclosure during continuous monitor operation. Power consumption matches the connected display’s requirements up to the rated limit.
Included accessories and fit notes
A detachable mains cord is supplied so the unit is ready to connect immediately. The barrel plug diameter must match the monitor’s DC jack exactly at 5.5 mm outer and 2.5 mm inner. The label advises verifying voltage, amperage and connector size before use. Buyers whose monitors need a different plug profile or higher wattage cannot use this adapter.
Highlights
- 60 W output powers compatible LCD monitors reliably
- 12 V 5 A delivery matches original adapter specifications
- 5 × 2.5 mm barrel connector fits listed models
- 100–240 V input enables worldwide use without a converter
- FCC CE RoHS certified for safety compliance
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the 5.5x2.5mm barrel plug to my monitor?
Match the 5.5 mm outer and 2.5 mm inner diameter exactly to the monitor's DC jack, then plug the IEC C7 figure-8 mains lead into the adapter's 2-prong inlet before switching on.
What part will need replacing first on the 60 W 12 V 5 A unit?
The detachable IEC C7 mains cable is the only user-replaceable component; the sealed adapter body has no serviceable parts.
At what load does the 12 V 5 A output hit its limit?
Continuous draw above 5 A or 60 W triggers the internal protection, so sustained loads must stay at or below those values.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



