We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SFX power supply unit with 80mm fan and multiple connectors

myVolts

myVolts 350W SFX Power Supply for Enhance ENP-1211J ENP-2120A ENP-2725A

SKU CH-KJ5A-M897E

350 W SFX power supply with 80 mm double-ball-bearing fan, 20+4-pin motherboard, 4-pin CPU, SATA, 6+2-pin PCIe, Molex and floppy connectors, compatible with Enhance ENP-1211J.

  • TypeAT
  • 350 W output powers small-form-factor builds
  • SFX form factor fits Enhance ENP-1211J ENP-2120A ENP-2725A units
  • 20+4 pin motherboard and 4-pin CPU connectors support modern boards
  • 80 mm double-ball-bearing fan keeps temperatures low
  • SATA LP4 floppy and 6+2 PCIe plugs cover legacy and new drives

350 W SFX replacement power supply

This 350 W SFX unit replaces Enhance ENP-1211J, ENP-2120A and ENP-2725A power supplies in compatible small-form-factor PCs. It delivers a 20+4 pin motherboard connector, a 4-pin CPU connector, Molex, floppy, SATA and a 6+2 pin PCIe connector for graphics cards. The AT-type design suits older Gateway and Compaq systems as well as newer custom builds needing an SFX footprint.

Check connector fit and case clearance

Verify that your motherboard accepts the 20+4 pin main connector and the 4-pin CPU power plug before ordering. Ensure the chassis has an SFX mounting aperture and enough depth for the 80 mm fan assembly. Confirm that the 6+2 pin PCIe lead reaches your graphics card and that SATA power cables match your drive count. The unit uses an AT power-on signal, so the motherboard must support that standard.

Thermals noise and power draw

An 80 mm double-ball-bearing fan exhausts heat from the compact housing under load. Acoustic output rises with fan speed when the supply approaches its 350 W rating. At typical desktop loads the fan runs at lower RPM, keeping noise modest for an SFX design. The unit draws AC power proportional to system demand plus its own conversion losses.

Highlights

  • 350 W output powers small-form-factor builds
  • SFX form factor fits Enhance ENP-1211J ENP-2120A ENP-2725A units
  • 20+4 pin motherboard and 4-pin CPU connectors support modern boards
  • 80 mm double-ball-bearing fan keeps temperatures low
  • SATA LP4 floppy and 6+2 PCIe plugs cover legacy and new drives

Specifications

TypeAT

Questions about this item

Does the box include every cable needed for a typical SFX build, or must I buy extra connectors?

The unit ships with a 20+4 pin motherboard cable, a 4-pin CPU cable, Molex, floppy, SATA and a 6+2 pin PCIe connector, covering most small-form-factor builds without extra purchases.

Which of the listed Enhance models — ENP-1211J, ENP-2120A or ENP-2725A — should I match to my existing PSU?

Choose the model printed on your current Enhance label; this replacement is validated for all three part numbers.

What does the 350 W rating mean when the supply is installed in a compact Gateway or Compaq chassis?

It delivers up to 350 W continuous through an 80 mm double-ball-bearing fan, keeping the 12 V rail stable inside tight SFX cases.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.