myVolts
myVolts 19.5V 6.67A 130W AC adapter 4.5mm for Dell XPS 15 9530 9550 9560 Precision M3800 M2800 5510 5520 5530
130W AC adapter delivers 19.5V 6.67A output for Dell XPS 15 and Precision workstations with a 4.5mm connector and 10ft total cable length
- Delivers 130 W at 19.5 V 6.67 A for reliable charging
- Works with XPS 15 9530 9550 9560 9570 and Precision M3800 5510 5520 5530
- Accepts 100 to 240 V 50/60 Hz input for worldwide use
- 5 mm barrel connector matches Dell part numbers DA130PM130 HA130PM130 6TTY6 0RN7NW 0V363H 332-1892 ADP-130EB
- Includes over-current over-voltage short-circuit over-heating overload surge and under-voltage protection
130W Dell charger for XPS 15 and Precision
This 19.5V 6.67A AC adapter replaces Dell part numbers DA130PM130 HA130PM130 6TTY6 0RN7NW 0V363H 332-1892 ADP-130EB 7CWK7 and 662JT. It fits Dell XPS 15 9530 9550 9560 and Precision M3800 M2800 5510 5520 5530 models as well as Dell 7347 7348 7459. The 4.5mm barrel connector matches the original specification.
Thermals noise and power draw
The unit accepts 100-240V 1.6A input at 50/60Hz and delivers a steady 130W output. Internal smart circuitry provides over current over voltage short circuit over heating overload surge and under voltage protection. No fan is present so operation is silent and heat is managed by the sealed enclosure.
Bundled cable and LED indicator
The package includes the adapter with an integrated AC plus DC cable totalling 10ft length. A built-in LED shows power status and helps locate the brick in low light. Soft bendable cables and rounded corners reduce strain at the connectors. Buyers who need a higher wattage unit or a different connector size should look elsewhere.
Highlights
- Delivers 130 W at 19.5 V 6.67 A for reliable charging
- Works with XPS 15 9530 9550 9560 9570 and Precision M3800 5510 5520 5530
- Accepts 100 to 240 V 50/60 Hz input for worldwide use
- 5 mm barrel connector matches Dell part numbers DA130PM130 HA130PM130 6TTY6 0RN7NW 0V363H 332-1892 ADP-130EB
- Includes over-current over-voltage short-circuit over-heating overload surge and under-voltage protection
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 4.5mm connector on my Dell XPS 15 9560 without damaging the port?
Align the 4.5mm barrel tip with the Dell charging port, insert straight until fully seated, then route the 10Ft cable to avoid sharp bends near the connector. The LED indicator confirms power.
What maintenance or replacement will the 130W AC adapter need over time?
Inspect the AC+DC cable for wear at the strain reliefs. Replace the unit if the LED indicator fails or output drops below 19.5V 6.67A under load. Internal protections are non-serviceable.
What limit appears first when the 130W charger runs continuously at full load?
Overheating protection triggers first under sustained 130W output. The internal smart circuit shuts down to prevent damage, then auto-resets once the adapter cools. Ensure ventilation around the brick.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



