myVolts
myVolts 12V 1.5A 18W ac adapter for HP Omni 10 10.1" Pro 610 G1
12 V 1.5 A 18 W AC adapter powers HP Omni 10 10.1" and Pro 610 G1 tablets with 100-240 V worldwide input and OVP, OCP, SCP protection
- World-wide 100-240 VAC input lets you charge anywhere
- 12 V 1.5 A output delivers 18 W for reliable HP Omni 10 power
- Built-in over-voltage, over-current and short-circuit protection safeguards the tablet
- Tested units supplied new and ready for immediate use
- Compatible with HP Omni 10 and Pro 610 G1 part numbers including F2L66AA#ABL and J7X67AA#ABL
12 V 1.5 A AC adapter for HP Omni 10
This 18 W power supply delivers 12 V at 1.5 A for the HP Omni 10 10.1" tablet and Pro 610 G1 models. It accepts worldwide input voltage from 100 to 240 VAC at 50 or 60 Hz. Built-in protection includes over-voltage, over-current and short-circuit safeguards.
Suitable for owners of listed Omni 10
Buyers needing a replacement charger for the exact part numbers shown will find this adapter compatible. Users with other HP tablets or laptops requiring a different voltage, current or connector should look elsewhere. The unit is not intended for devices outside the specified compatibility list.
18 W output with 12 V 1.5 A rating
The adapter comfortably powers the tablet while charging its battery under normal workloads. Headroom is limited to the rated 18 W, so sustained maximum load leaves no margin for additional peripherals. It meets the power requirements of the supported models without excess capacity.
Highlights
- World-wide 100-240 VAC input lets you charge anywhere
- 12 V 1.5 A output delivers 18 W for reliable HP Omni 10 power
- Built-in over-voltage, over-current and short-circuit protection safeguards the tablet
- Tested units supplied new and ready for immediate use
- Compatible with HP Omni 10 and Pro 610 G1 part numbers including F2L66AA#ABL and J7X67AA#ABL
Specifications
No published specifications for this item yet.
Questions about this item
Does this adapter need a separate mains lead or is the wall plug built in?
The unit is a complete 12 V 1.5 A switching supply with an integrated cord, so no extra mains cable is required.
Will it safely charge the original HP Omni 10 battery without triggering over-voltage protection?
Yes, the 12 V 18 W output matches the tablet spec and the adapter includes OVP, OCP and SCP safeguards.
How can I confirm the adapter is delivering power once plugged in?
The tablet charging indicator lights and the battery icon shows charging when the 12 V 1.5 A supply is connected correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



