myVolts
myVolts 10.5V 3.8A 40W AC Adapter 4.8mm×1.7mm for Sony Vaio DUO11 DUO10 DUO13
A 40 W AC adapter delivering 10.5 V at 3.8 A with a 4.8 mm × 1.7 mm connector for Sony Vaio DUO11, DUO10 and DUO13 laptops
- Worldwide 100–240 V input lets you charge anywhere
- 5 V 3.8 A output delivers a steady 40 W
- 8 mm × 1.7 mm connector fits Sony Duo and Pro models
- Over-voltage, over-current and short-circuit safeguards protect the laptop
- Operates from 0 °C to 40 °C for reliable daily use
40W AC Adapter for Sony Vaio DUO Series
This 40W AC adapter delivers 10.5V at 3.8A through a 4.8mm×1.7mm connector. It is built for owners of Sony Vaio DUO11, DUO10, DUO13, Pro 11 and Pro 13 models needing a replacement or spare charger. The unit accepts 100 to 240V AC input for worldwide use and includes a US power cord.
Thermal and Electrical Behaviour
The adapter operates between 0 and 40 degrees Celsius and stores safely from -20 to 85 degrees Celsius. Protections include over-voltage at 120% minimum, over-current at 120% minimum, overload hiccup mode with auto-recovery, and automatic short-circuit recovery. Load regulation stays within ±5% and insulation resistance meets DC 500V 100M minimum.
4.8mm×1.7mm Connector Fit
The barrel connector measures 4.8mm outer diameter by 1.7mm inner diameter. This specific size determines whether the adapter physically mates with the laptop's DC-in jack. Verify the port dimensions on your Sony Vaio model before purchase; a different connector size will not connect.
Highlights
- Worldwide 100–240 V input lets you charge anywhere
- 5 V 3.8 A output delivers a steady 40 W
- 8 mm × 1.7 mm connector fits Sony Duo and Pro models
- Over-voltage, over-current and short-circuit safeguards protect the laptop
- Operates from 0 °C to 40 °C for reliable daily use
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the 4.8mm×1.7mm plug and what is the common mistake?
Insert the barrel fully until it seats firmly; the frequent error is stopping at the first click which leaves a loose connection.
Will the US power cord or adapter itself need replacement after extended use?
The cord and adapter are rated for 0 to 40 °C operation and -20 to 85 °C storage; replace either if the cable insulation cracks or the brick overheats.
What is the first limit reached when the adapter runs at full 40 W continuously?
The over-load protection in hiccup mode triggers at 120 % minimum, cycling the output off and on automatically.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



