We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight copper tube, 7/8 in OD, 2 ft length, hard temper, seamless finish

Mueller Industries, Inc.

Mueller Industries, Inc. STREAMLINE LH06002RT Copper Tubing L 7/8 in OD 2 ft

SKU CH-B359-8PB6K

Seamless copper tubing, 7/8 in OD, 2 ft length, Type L for potable water systems

  • Seamless copper construction resists leaks and corrosion
  • Type L wall thickness 0.045 in handles 466 psi at 200 °F
  • Meets ASTM B88, NSF 372 and NSF/ANSI/CAN 61 for potable water
  • Hard-drawn temper C12200 copper withstands 400 °F continuous service
  • 2 ft straight length, 7/8 in OD, ready to cut and install

Copper tubing for potable water lines

This straight copper tubing meets ASTM B88 and NSF/ANSI/CAN 61 standards for potable water applications. The seamless C12200 copper construction with hard temper provides reliable performance at up to 466 psi at 200 degrees F and 400 degrees F maximum temperature. It suits residential and commercial plumbing installations requiring 3/4 inch copper tube size L.

Verify your fitting compatibility

Confirm that your existing fittings accept 7/8 inch outside diameter tubing with 0.75 inch inside diameter and 0.045 inch wall thickness. The hard temper means the tube will not bend easily without proper tools. Ensure your system operating pressure and temperature stay within the 466 psi at 200 degrees F rating for safe operation.

Cleaned and capped status affects installation prep

The tubing arrives not cleaned and capped, so interior debris removal and end preparation are required before soldering or brazing. No protective coating is applied, leaving the raw copper surface ready for flux application. The 2 foot straight length minimises joints in short runs but requires cutting for custom layouts.

Highlights

  • Seamless copper construction resists leaks and corrosion
  • Type L wall thickness 0.045 in handles 466 psi at 200 °F
  • Meets ASTM B88, NSF 372 and NSF/ANSI/CAN 61 for potable water
  • Hard-drawn temper C12200 copper withstands 400 °F continuous service
  • 2 ft straight length, 7/8 in OD, ready to cut and install

Specifications

BrandSTREAMLINE

Questions about this item

Does the 2 ft straight length ship capped or do I need to buy caps separately?

The tubing is supplied cleaned but not capped, so end caps or fittings must be purchased separately.

Type L wall is .045 in — when would I choose this over Type K or M for a 3/4 in copper tube size?

Type L at .045 in wall balances pressure rating and workability for general potable water and hydronic systems up to 466 psi.

What does the 466 psi @ 200 °F rating mean when the tube is installed in a hot-water loop?

At 200 °F the seamless C12200 copper tube safely handles 466 psi; pressure capacity decreases as temperature rises toward the 400 °F limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.