We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled copper tubing, 7/8 inch outside diameter, soft temper, 100 foot length

Mueller Industries, Inc.

Mueller Industries, Inc. KS06100 Copper Coil Tubing 7/8 in OD 100 ft Type K

SKU CH-VCCM-D4DAD MPN KS06100

Seamless Type K copper coil tubing, 7/8 in outside diameter by 100 ft, rated for 682 psi at 200 °F and certified to ASTM B88, NSF 372 and NSF/ANSI/CAN 61 for potable water

  • TypeDrain Components
  • MaterialCopper
  • ASTM B88 compliance ensures reliable potable-water installations
  • NSF/ANSI/CAN 61 certification confirms safe drinking-water contact
  • Seamless C12200 copper resists leaks and corrosion
  • Soft temper allows tight bends without kinking
  • 682 psi at 200 °F rating handles demanding pressure loads

Type K copper coil for potable water

This seamless copper tubing meets ASTM B88 and NSF/ANSI/CAN 61 standards for potable water systems. The coil measures 100 ft with a 7/8 in outside diameter and 0.065 in wall thickness. It is manufactured from C12200 grade copper in a soft temper for easy bending and forming.

Installers needing long runs without joints

Plumbers and contractors benefit from the 100 ft continuous length that reduces the number of fittings required on site. The soft temper allows hand bending around obstacles without special tools. Projects requiring rigid straight lengths or pre-cleaned and capped ends should consider alternative products.

682 psi maximum operating pressure at 200 °F

This pressure rating at the stated temperature is the primary factor for determining suitability in a given hydronic or potable water installation. Exceeding either the pressure or the 400 °F temperature limit voids the design margin. Always verify system conditions against these limits before specifying.

Highlights

  • ASTM B88 compliance ensures reliable potable-water installations
  • NSF/ANSI/CAN 61 certification confirms safe drinking-water contact
  • Seamless C12200 copper resists leaks and corrosion
  • Soft temper allows tight bends without kinking
  • 682 psi at 200 °F rating handles demanding pressure loads

Specifications

TypeDrain Components
MaterialCopper
BrandMueller Industries
ModelKS06100

Questions about this item

How long can the 100 ft coil run continuously at 682 psi before the pressure limit is reached?

The tubing is rated for a maximum operating pressure of 682 psi at 200 degrees F, so it will hold that pressure as long as the system stays within the temperature limit.

Does the soft-temper copper coil stay cool and quiet during all-day water flow?

Copper tubing has no moving parts and generates no noise; heat transfer follows the water temperature up to the 400 degrees F maximum operating temperature.

What fittings or tools do I need to connect 3/4 in copper tube size Type K coil?

You need 3/4 in copper tube size Type K compatible fittings and standard copper joining tools such as a tubing cutter, deburring tool and torch for soldering.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.