We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC 45-degree elbow with hub connection

Mueller Industries, Inc.

Mueller Industries, Inc. 1WKC5 3" Hub PVC DWV 45 Degree Elbow

SKU CH-2K0Y-RN2XB MPN 1WKC5

A 3-inch PVC drain elbow connects hub fittings at a 45-degree angle for DWV systems

  • TypeDrain Components
  • ColorWhite
  • 45-degree hub elbow routes drainage around corners smoothly
  • Schedule 40 PVC handles 140 °F continuous service reliably
  • White finish matches standard DWV piping for clean look
  • ASTM D1784 cell class 12454 certifies material quality
  • Hub connection fits 3-inch pipe without threading needed

3-Inch PVC DWV 45° Hub Elbow

This Mueller Industries fitting redirects drainage flow at a forty-five-degree angle using a hub connection. The white Schedule 40 PVC body meets ASTM D1784 cell class 12454 for standard drain, waste and vent installations. It is supplied new and rated for a maximum temperature of one hundred forty degrees Fahrenheit.

Replaces Damaged Or Misaligned DWV Bends

Swap this elbow in when an existing hub fitting cracks, leaks or forces an awkward pipe run that stresses joints. The forty-five-degree sweep reduces turbulence compared with a ninety-degree turn, so the upgrade is worth it whenever smoother flow and less clog risk are priorities in a gravity-fed system.

Suits Residential And Light-Commercial Drain Lines

Plumbers and DIYers running three-inch PVC drain, waste or vent lines will find the hub connection familiar and the material code-compliant. Installers needing pressure-rated pipe, solvent-weld spigot ends, or fittings approved for temperatures above one hundred forty degrees should select a different product.

Highlights

  • 45-degree hub elbow routes drainage around corners smoothly
  • Schedule 40 PVC handles 140 °F continuous service reliably
  • White finish matches standard DWV piping for clean look
  • ASTM D1784 cell class 12454 certifies material quality
  • Hub connection fits 3-inch pipe without threading needed

Specifications

TypeDrain Components
ColorWhite
BrandMueller Industries
Model1WKC5

Questions about this item

Will this 3-inch hub elbow fit Schedule 40 PVC pipe?

Yes, it is made for Schedule 40 pipe in a 3-inch size and uses a hub connection that slides over the pipe end.

What is the correct way to solvent-weld this PVC elbow?

Clean both surfaces, apply primer then cement to the pipe and inside the hub, push the pipe fully into the socket with a quarter turn, and hold until the joint sets.

When should this DWV elbow be replaced?

Replace it if you see cracks, warping, or leaks at the joint; the material is rated to 140 degrees F, so sustained hotter discharge can shorten its life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.