We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC reducing wye fitting, hub connections, 4x4x2 inches

Mueller Industries, Inc.

Mueller Industries, Inc. 1WJV4 4 in x 4 in x 2 in PVC DWV Reducing Wye trap

SKU CH-EY2B-WGM28 MPN 1WJV4

PVC DWV reducing wye connects 4 in and 2 in hub pipes for drainage systems

  • TypeDrain Components
  • ColorWhite
  • Reducing wye joins three pipe runs
  • Schedule 40 PVC handles 140 °F max
  • Hub connections allow solvent-weld joints
  • Meets ASTM D1784 cell class 12454
  • White finish identifies DWV system piping

PVC Reducing Wye 4x4x2 Inch Hub

This Mueller Industries Schedule 40 PVC reducing wye connects a 2-inch branch to a 4-inch main line in drain, waste and vent systems. The hub connections accept solvent-weld pipe for a permanent joint. It is rated for a maximum temperature of 140 degrees F and meets ASTM D1784 cell class 12454.

Suits Standard DWV Layouts Not Pressure Lines

The fitting is designed for gravity-flow drainage and venting only; it is not rated for pressure applications. Installers who need a pressurised branch or a different pipe diameter should select another fitting.

Simple Solvent-Weld Installation

Cut pipe square, deburr, apply primer and cement, then push fully into each hub. The most common error is insufficient cement coverage, which can lead to leaks once the system is tested.

Highlights

  • Reducing wye joins three pipe runs
  • Schedule 40 PVC handles 140 °F max
  • Hub connections allow solvent-weld joints
  • Meets ASTM D1784 cell class 12454
  • White finish identifies DWV system piping

Specifications

TypeDrain Components
ColorWhite
BrandMueller Industries
Model1WJV4

Questions about this item

What size hub connections does this reducing wye use for the 4 in and 2 in pipes?

The fitting provides hub connections for 4 in x 4 in x 2 in pipe sizes, allowing direct solvent-weld joints to Schedule 40 PVC pipe.

Can this Schedule 40 PVC wye handle the same 140 Degrees F maximum temperature as my existing DWV lines?

Yes, the fitting is rated for a maximum temperature of 140 Degrees F, matching standard PVC DWV system limits.

How can I confirm the fitting meets the required material standard after installation?

The fitting complies with ASTM D1784 and Cell Class 12454, which are marked on the body for visual verification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.