We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC Schedule 40 wye with 45-degree reducing elbow, three hub sockets

Mueller Industries, Inc.

Mueller Industries 05837 PVC Wye 45° Elbow Trap 3×3×1½ in Schedule 40

SKU CH-CGC9-5HVJA MPN 05837

PVC Schedule 40 wye with 45° reducing elbow joins 3 in, 3 in and 1½ in hub connections for gravity-flow drainage

  • TypeDrain Components
  • Schedule 40 PVC handles 140 °F drain flow
  • 45 ° reducing elbow joins three hub connections
  • White finish identifies pipe in crowded installations
  • Socket hubs accept standard Schedule 40 pipe
  • Gravity-flow design needs no mechanical seal

Mueller PVC Wye 45° Elbow

This Mueller Industries 05837 is a Schedule 40 PVC combination wye and 45 degree reducing elbow. It connects a 3 inch main line with a 1 1/2 inch branch using female socket hubs. The white fitting is designed for gravity flow drainage systems operating between -20 degrees and 140 degrees F.

Suits 3 inch DWV branch connections

Plumbers joining a 1 1/2 inch branch into a 3 inch drain-waste-vent line will find this hub-by-hub fitting matches the required dimensions. It is not for pressure applications exceeding gravity flow limits. Builders needing a straight coupling, a different branch angle, or a slip-joint connection should look at other fitting types.

Schedule 40 PVC gravity flow rating

The single specification that decides fit is the Schedule 40 gravity flow maximum operating pressure rating. This defines the wall thickness and pressure boundary for the 3 inch by 1 1/2 inch hub configuration. Verify your system design stays within gravity flow parameters before selecting this 05837 model.

Highlights

  • Schedule 40 PVC handles 140 °F drain flow
  • 45 ° reducing elbow joins three hub connections
  • White finish identifies pipe in crowded installations
  • Socket hubs accept standard Schedule 40 pipe
  • Gravity-flow design needs no mechanical seal

Specifications

TypeDrain Components
BrandMueller Industries
Model05837

Questions about this item

Does the PVC Wye 45° Elbow Trap 05837 generate any noise or heat when water runs through it all day?

The fitting is a passive Schedule 40 PVC component with no moving parts, so it produces no noise or heat during continuous gravity-flow drainage.

What existing pipe and fittings must I already have to install the 3×3×1½ in Wye 45° Elbow Trap 05837?

You need 3 in and 1½ in Schedule 40 PVC pipe with matching socket hubs, plus compatible solvent cement and primer for solvent-weld joints.

Will the 05837 Wye 45° Elbow Trap connect directly to older Schedule 40 PVC pipe already in the ground?

Yes, its socket hubs are sized for standard Schedule 40 PVC outside diameters, so it solvent-welds to existing Schedule 40 pipe of the same nominal sizes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.