MTX
MTX AWMC3 Marine Receiver 4×50 W Bluetooth AM/FM/WB SiriusXM-Ready
All-weather marine receiver with Bluetooth, AM/FM/WB and SiriusXM-ready tuner, internal 4×50 W amplifier and 3″ colour display
- TypeMarine Receiver
- Weight2.5000
- FeaturesInternal 4x50 Watt power amplifier
- All-weather media controller built for UTV and boat use
- Bluetooth audio streaming with AM/FM/WB and SiriusXM-ready tuner
- Internal 4×50 Watt amplifier drives speakers directly
- 3" full-colour TFT display readable in bright sunlight
- Front and rear pre-outs allow external amplifier expansion
All-Weather Marine Media Controller
The MTX AWMC3 is a marine-grade receiver built for UTVs and boats. It combines Bluetooth streaming, AM/FM/WB radio and SiriusXM readiness with a 3-inch full-colour TFT display. An internal 4x50 Watt amplifier drives speakers directly, while front and rear pre-outs allow external amplifiers to be added. Soft-touch buttons remain usable with gloves on.
Suited to open-cockpit installs.
This unit fits riders and boaters who want a single-source head unit with weather-resistant construction and simple glove-friendly controls. It supports optional remote controls and vehicle-specific dash kits for Polaris RZR and Ranger models. Buyers who need independent zone volume, on-screen navigation or NMEA data integration should look at dedicated marine multifunction displays instead.
Internal 4x50 Watt amplifier decides fit
The built-in amplifier delivers 50 watts per channel into four channels, so the AWMC3 can power a full speaker set without extra hardware. If the system design calls for more output than the internal amp provides, the pre-outs let you add external amplification. Match the amplifier capability to the speaker power handling and desired volume level before purchase.
Highlights
- All-weather media controller built for UTV and boat use
- Bluetooth audio streaming with AM/FM/WB and SiriusXM-ready tuner
- Internal 4×50 Watt amplifier drives speakers directly
- 3" full-colour TFT display readable in bright sunlight
- Front and rear pre-outs allow external amplifier expansion
Specifications
| Brand | MTX Mobile Audio |
|---|---|
| Model | AWMC3 |
| Type | Marine Receiver |
| Part Number | AWMC3 |
| Weight | 2.5000 |
| Features | Internal 4x50 Watt power amplifier |
Questions about this item
What dashboard opening does the AWMC3 need for a flush mount?
The AWMC3 fits a standard single-DIN cut-out; MTX also sells vehicle-specific dash kits for Polaris RZR and Ranger models to give a factory look.
How do I pair a phone to the AWMC3 Bluetooth, and what step is often missed?
Press the source button until Bluetooth appears, then select AWMC3 on the phone; the step many miss is confirming the pairing code on both the receiver screen and the phone before audio will stream.
When should the fuse on the power lead be checked or replaced?
Inspect the in-line fuse on the yellow constant-power wire if the display stays dark or the unit loses memory after the ignition is turned off.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



