MSI
MSI 919-S3661-03S server motherboard uATX AM5 25G SFP28 4 DDR5 5200MT/s
uATX server board with AM5 socket, dual 25G SFP28 ports, four DDR5 5200MT/s slots and IPMI management
- uATX 9.6" form factor fits dense server chassis
- Single AM5 socket runs Ryzen 7000 and EPYC 4004/4005 CPUs
- Four DDR5 DIMM slots reach 5200MT/s with ECC support
- Dual 25G SFP28 ports via Intel E810-XXVAM2 controller
- Dedicated 1000Base-T management port with ASPEED AST2600 IPMI
Server motherboard with dual 25G SFP28
This uATX server motherboard fits a single AM5 socket and supports AMD Ryzen 7000 Series and EPYC 4004/4005 Series processors. Four DDR5 DIMM slots run up to 5200MT/s with ECC or non-ECC UDIMM modules. An onboard Intel E810-XXVAM2 controller provides two 25G SFP28 network ports. The board measures 9.6 by 9.6 inches.
Suited for high-density single-socket builds
Builders who need integrated 25G SFP28 connectivity and IPMI-based remote management will find this board a direct fit. It also offers one PCIe 4.0 x4 M.2 slot for NVMe storage. Customers requiring more than four memory channels or a second processor socket should consider a different platform.
Dual 25G SFP28 with IPMI
The defining specification is the pair of 25G SFP28 ports driven by the Intel E810-XXVAM2 controller alongside an ASPEED AST2600 BMC with IPMI and Redfish support. This combination delivers high-speed networking and full out-of-band management on a compact uATX form factor.
Highlights
- uATX 9.6" form factor fits dense server chassis
- Single AM5 socket runs Ryzen 7000 and EPYC 4004/4005 CPUs
- Four DDR5 DIMM slots reach 5200MT/s with ECC support
- Dual 25G SFP28 ports via Intel E810-XXVAM2 controller
- Dedicated 1000Base-T management port with ASPEED AST2600 IPMI
Specifications
No published specifications for this item yet.
Questions about this item
What does the 25G SFP28 interface cap at in practice?
The two 25G SFP28 ports are driven by the Intel E810-XXVAM2 controller, giving each port a 25 Gbps ceiling.
What physical space does the uATX board need to fit?
It measures 9.6" x 9.6" and follows the uATX form factor, so it fits any chassis that accepts that footprint.
How is the board installed and which step is often missed?
Mount the board on standoffs matching the uATX hole pattern, connect the 24-pin and CPU power headers, then enable IPMI in the AST2600 BMC — that last step is the one most builders skip.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



