We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dark grey furry rigid windscreen with tapered rubber base

Movo

Movo WS-G220 Furry Rigid Windscreen 18-23mm 8.6in Dark Gray

SKU CH-BWBK-P6W40

Fits microphones 18-23mm wide and up to 8.6in long, using simulated rabbit fur and acoustic foam to cut wind noise by up to 40dB with minimal high-frequency loss

  • TypeAccessory
  • Superior wind protection with simulated rabbit fur and acoustic foam
  • Tapered rubber base gives 360-degree wind protection
  • Reduces wind noise by up to 40dB with minimum high-frequency loss
  • Reduces vocal plosives for cleaner recordings
  • Fits microphones 18-23mm diameter up to 8.6in long

Windscreen for 18-23mm Microphones

The Movo WS-G220 is a rigid furry windscreen built for shotgun and broadcast microphones with capsule diameters between 18 and 23 millimetres. It uses a dual-layer artificial fur cover over acoustic foam and a tapered rubber base to seal the mic fully. Wind noise is reduced by up to 40 decibels while preserving high-frequency detail. The dark-grey finish suits field and studio work alike.

Check Capsule Diameter and Length

Measure the microphone capsule first; it must fall within the 18 to 23 millimetre range for the rubber base to seal correctly. Then measure from the front of the capsule to the end of the grille vents and add roughly one centimetre to confirm the 8.6 inch (22 centimetre) internal depth is sufficient. An undersized or oversized capsule will leak air and defeat the 360-degree wind protection.

For Outdoor Dialogue and Field Recording

This windscreen suits videographers, journalists and sound recordists who need reliable wind attenuation on compatible shotgun mics. It is not for users whose microphones fall outside the 18-23mm diameter window or whose grille length exceeds the internal depth. Buyers needing a smaller slip-on foam cover or a larger blimp system should look elsewhere.

Highlights

  • Superior wind protection with simulated rabbit fur and acoustic foam
  • Tapered rubber base gives 360-degree wind protection
  • Reduces wind noise by up to 40dB with minimum high-frequency loss
  • Reduces vocal plosives for cleaner recordings
  • Fits microphones 18-23mm diameter up to 8.6in long

Specifications

TypeAccessory

Questions about this item

What comes in the box and what else do I need to buy?

The package includes the WS-G220 windscreen with its simulated rabbit fur outer layer, acoustic foam inner layer and tapered rubber base. You supply any microphone with a capsule diameter between 18 and 23mm and a grille length up to 8.6in.

How do I choose the right size for my microphone?

Measure the capsule diameter — it must fall between 18 and 23mm. Then measure from the front of the capsule to the end of the grille vents and add roughly 1cm; the total must not exceed 8.6in (22cm) for a full seal.

What does the 40dB wind-noise reduction mean in practice?

In real use the dual-layer fur and foam construction cuts wind noise by up to 40dB while keeping high-frequency loss to a minimum, and the airtight rubber base maintains 360-degree protection against gusts and vocal plosives.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.