We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Mount-It

Mount-It MI-63151 Articulating Quad Monitor Desk Mount 13-27 Inch

SKU CH-G64F-GRMEZ

Holds four 13 to 27 inch screens with 240 degree swivel, 360 degree rotation, +90/-15 degree tilt, VESA 75 and 100 support, and 24 lb capacity per monitor

  • TypeMount
  • Clears desk space by mounting four 13-27 inch screens
  • 240° swivel and 360° rotation with landscape-to-portrait pivot
  • +90°/-15° tilt reduces glare for sitting or standing use
  • VESA 75x75 and 100x100 compatibility with secure grommet installation
  • Integrated cable clips keep wires tidy behind arms and pole

Four-monitor desk mount

The Mount-It MI-63151 holds four screens from 13 to 27 inches on a single pole. Each arm supports up to 24 lb and attaches to VESA 75x75 or 100x100 patterns. Grommet mounting secures the base through a desk hole for a stable footprint.

Replaces four individual stands

Swapping separate bases for this articulating arm clears a large surface area for keyboards or paperwork. The upgrade is worthwhile when monitors currently sit at fixed heights and angles that cause neck strain. It is not suited for screens heavier than 24 lb or larger than 27 inches.

Fits grommet-ready desks

A desk with a pre-drilled grommet hole is required for installation. The pole height adjusts to set the optimal eye level while arms swivel 240 degrees and rotate 360 degrees. Cable clips on the arms and pole route wires neatly. Tilt ranges from -15 to +90 degrees for landscape or portrait orientation.

Highlights

  • Clears desk space by mounting four 13-27 inch screens
  • 240° swivel and 360° rotation with landscape-to-portrait pivot
  • +90°/-15° tilt reduces glare for sitting or standing use
  • VESA 75x75 and 100x100 compatibility with secure grommet installation
  • Integrated cable clips keep wires tidy behind arms and pole

Specifications

TypeMount

Questions about this item

What desk thickness does the MI-63151 grommet clamp accept?

The mount uses a secure grommet installation through a desk hole; the clamp accommodates typical desk thicknesses up to the bolt length supplied in the hardware kit.

Which step do installers most often miss when assembling the quad arm?

Many users forget to route each monitor cable through the management clips beneath the arms and behind the pole before tightening the VESA brackets.

What part wears first and how is it replaced on this mount?

The gas-spring tension in each arm can lose force over time; replacement springs are installed by removing the arm pivot bolt and swapping the cylinder.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.