Mount-It! MI-1882BLK Dual Monitor Desk Mount 13-32" 17.6 lbs
Supports two 13 to 32 inch monitors up to 17.6 lbs each with independent gas-spring arms, VESA 75 and 100 mounting, full tilt, swivel and rotation adjustment, and integrated cable routing
- TypeClamp and Grommet Base
- Cabinet ColorBlack
- CompatibilityComputer Monitors
- SpecificationsHigh-Strength Steel, Clamp and Grommet Base, Articulating, 1
- Size9"
- FeaturesClamp and Grommet Base, Articulating, High-Strength Steel, C
- Supports two monitors 13-32 inches up to 17.6 lbs each
- Fits VESA 75x75mm and 100x100mm patterns on flat or curved screens
- Full motion: tilt 90/45 degrees, swivel 90 degrees, rotate 360 degrees
- Gas spring height adjustment with hex tension dial per arm
- Integrated cable routing along both arms for a tidy desk
Dual Monitor Desk Mount
The Mount-It! MI-1882BLK holds two monitors from 13 to 32 inches, each up to 17.6 lbs. Two independent gas-spring arms clamp or grommet-mount to the desk and support VESA 75x75mm and 100x100mm patterns. High-strength steel construction provides stable articulation for flat or curved screens in home offices or trading setups.
Suits users who want independent motion
Buyers needing fully independent positioning for two screens benefit from separate arms with tilt (+90°/-45°), swivel (±90°), 360° rotation and smooth height adjustment. Hex tension tuning matches each monitor's weight. Integrated cable routing keeps wires hidden. This mount does not serve users who need a single fixed pole or a non-articulating solution.
VESA 75x75mm and 100x100mm compatibility
The decisive specification is the VESA pattern: both 75x75mm and 100x100mm are supported on each arm. Verify your monitors match one of these patterns and weigh 17.6 lbs or less per arm. Without a matching VESA pattern the mount cannot be installed.
Highlights
- Supports two monitors 13-32 inches up to 17.6 lbs each
- Fits VESA 75x75mm and 100x100mm patterns on flat or curved screens
- Full motion: tilt 90/45 degrees, swivel 90 degrees, rotate 360 degrees
- Gas spring height adjustment with hex tension dial per arm
- Integrated cable routing along both arms for a tidy desk
Specifications
| Brand | Mount-It! |
|---|---|
| Model | MI-1882BLK |
| Part Number | MI-1882BLK |
| Type | Clamp and Grommet Base |
| Cabinet Color | Black |
| Compatibility | Computer Monitors |
| Specifications | High-Strength Steel, Clamp and Grommet Base, Articulating, 100_x_100_mm, 17.6 pounds, 75_x_75_mm, 14.1986 L x 23.6982 W x 40.9956 H centimeters, 3.86 kilograms, Lifetime, Computer Monitors, Black, MI-1882BLK |
| Size | 9" |
| Features | Clamp and Grommet Base, Articulating, High-Strength Steel, Computer Monitors, 100_x_100_mm, 75_x_75_mm |
Questions about this item
Will the MI-1882BLK arms support my older 13 to 32-inch monitors with 75x75 mm or 100x100 mm VESA patterns?
Each arm fits screens from 13 to 32 inches and accepts both 75x75 mm and 100x100 mm VESA patterns, so your existing monitors will mount if they fall in that size range and use those hole spacings.
How can I verify the MI-1882BLK gas springs are holding each 17.6 lbs monitor at the height I set?
After mounting, position each screen where you want it and release; the gas spring should keep it steady without drifting, and the hex tension adjustment lets you fine-tune resistance until the monitor stays put through tilt, swivel and 360° rotation.
Does the MI-1882BLK package include both the clamp and grommet bases, or do I need to buy one separately?
The mount comes with a combined clamp and grommet base for each arm, so you can choose either mounting method right out of the box without extra purchases.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



