We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel vertical dual monitor stand with clamp and grommet base, detachable VESA plates, cable clips

Mount-It

Mount-It MI-1768 Vertical Dual Monitor Stand 13-32" 17.6lbs

SKU CH-Q5T7-VSP6Z MPN MI-1768

Stacks two 13–32 inch screens vertically on a single pole with 75×75 or 100×100 VESA mounts, each arm holding 17.6 lbs and offering ±45° tilt, ±45° swivel and ±180° rotation

  • TypeMount
  • Saves desk space with vertical stacked layout
  • Fits screens 13 to 32 inches and 75 or 100 mm VESA
  • Each arm holds up to 17.6 lbs with steel construction
  • Clamp or grommet base suits most desks
  • Tilt, swivel and 180 rotation plus cable clips for clean install

Vertical dual monitor stand

The Mount-It MI-1768 is a stacked dual monitor mount built from high grade steel. It holds two screens from 13 to 32 inches at an ergonomic height while freeing desk space. Each arm supports up to 17.6 lbs and fits 75x75mm or 100x100mm VESA patterns. The stand includes both a C-clamp and a grommet base for desk attachment.

VESA 75x75mm and 100x100mm compatibility

The single specification that decides fit is the VESA bolt-hole pattern on the back of each monitor. The MI-1768 accepts only the square 75mm or 100mm spacing; monitors with rectangular or proprietary hole patterns will not mount. Measure the hole centres in millimetres before purchase to confirm compatibility.

Adjustment range and desk mounting

The mount provides tilt of +/-45°, swivel of +/-45° and screen rotation of +/-180° for each arm. Height is adjustable along the vertical pole. Integrated cable management clips keep wires organised. The included C-clamp and grommet base adapt to a variety of desktop thicknesses, while detachable VESA plates simplify installation. Builders whose monitors exceed 17.6 lbs each or use non-standard VESA patterns cannot use this stand.

Highlights

  • Saves desk space with vertical stacked layout
  • Fits screens 13 to 32 inches and 75 or 100 mm VESA
  • Each arm holds up to 17.6 lbs with steel construction
  • Clamp or grommet base suits most desks
  • Tilt, swivel and 180 rotation plus cable clips for clean install

Specifications

TypeMount
Shipping weight4.52 kg
Package size450 × 157 × 140 mm

Questions about this item

How much desk space does the vertical stacking design actually free up compared to side-by-side monitors?

The stacked layout places one screen directly above the other so the footprint stays the width of a single monitor up to 32 inches, leaving the rest of the desk clear.

What VESA patterns does the MI-1768 support and how do they limit monitor choice?

It accepts 75x75 mm and 100x100 mm square hole patterns, so any 13 to 32 inch screen with those mounting holes and a weight up to 17.6 lbs per arm will attach.

What desk thicknesses and hole sizes do the C-clamp and grommet base accommodate?

The kit includes both a C-clamp for desk edges and a grommet insert for pre-drilled holes, letting you secure the pole to most standard desktop thicknesses without extra hardware.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.