MORMOQUE EP-06 BLK Wired In-Ear Earphones 10mm 16Ω 3.5mm Black
Wired in-ear earphones with 10 mm drivers, 16 Ω impedance, built-in microphone, six silicone tips and a 4.9 ft gold-plated 3.5 mm cable
- TypeIn-Ear
- ColorBlack
- Driver Unit10 millimeters
- Frequency Response5Hz-20KHz
- THDIn Ear
- Input Impedance16 ohms
- 10mm drivers deliver deep bass for immersive sound
- Built-in microphone with 95dB SNR ensures clear calls
- Six silicone tip sizes provide a secure, comfortable fit
- Gold-plated 3.5mm plug offers wide device compatibility
- 5m tangle-resistant cable gives freedom of movement
MORMOQUE EP-06 BLK Wired In-Ear Earphones
The MORMOQUE EP-06 BLK are wired in-ear earphones with a 3.5 mm connector and a 10 mm driver unit. They suit listeners who want a simple plug-and-play audio solution for music, calls or gaming on devices that still provide a headphone jack.
Installation and common issues
Plug the gold-plated 3.5 mm jack into any compatible port and select from six silicone tip sizes to seal the ear canal. The 1.5 m Y-shaped cable uses reinforced TPE to resist tangles, while the magnetic metal housings snap together for storage. A single multifunction button handles calls and playback; there are no separate volume controls.
Capacity and headroom
The 10 mm neodymium drivers deliver a frequency response of 20 Hz to 20 kHz with 100 dB sensitivity at 16 Ω impedance and a maximum input power of 5 mW. The built-in condenser microphone covers 20 Hz to 20 kHz with 95 dB signal-to-noise ratio for clear voice capture. Bass-heavy material at very high volumes may reach the driver’s power limit.
Highlights
- 10mm drivers deliver deep bass for immersive sound
- Built-in microphone with 95dB SNR ensures clear calls
- Six silicone tip sizes provide a secure, comfortable fit
- Gold-plated 3.5mm plug offers wide device compatibility
- 5m tangle-resistant cable gives freedom of movement
Specifications
| Brand | MORMOQUE |
|---|---|
| Model | EP-06 3.5mm wired earbuds/black, EP-06, EP-06 BLK |
| Part Number | EP-06 BLK |
| Type | In-Ear |
| Color | Black |
| Driver Unit | 10 millimeters |
| Frequency Response | 5Hz-20KHz |
| THD | In Ear |
| Input Impedance | 16 ohms |
| Signal to Noise Ratio(SNR) | 95 decibels |
| Sensitivity | 95 decibels |
| Connector | 3.5mm |
| Ear Coupling | Single Ear |
| Cord Length | User Manual |
| Weight | 16.02 grams |
| Noise Cancelling | sound_isolation |
| Wireless Type | No |
| Microphone Impedance | 16 ohm |
| Microphone Frequency Response | 20Hz-20KHz |
| Microphone Signal to Noise Ratio(SNR) | 95 decibels |
| Microphone Sensitivity | 95 decibels |
| Features | sound_isolation, Tangle Free, Volume Control, remote, Wired, In Ear, dynamic_driver, 16 ohm, Ear Cushions |
| Package Contents | Ear Cushions, Silicone ear cushions, User Manual |
Questions about this item
How do I know the 10mm drivers and 16Ω impedance are delivering sound correctly after I plug them in?
Play audio at moderate volume — clear stereo with deep bass and no distortion confirms the 10mm drivers and 16Ω impedance are working as intended.
What comes in the box with the EP-06 BLK and what must I buy separately?
The box includes the earphones with a 4.9ft cable, gold-plated 3.5mm plug, built-in microphone, multifunction button, magnetic earbuds, a storage pouch, and 6 silicone ear tips (S/M/L); nothing else is required for devices with a 3.5mm jack.
Which version of the EP-06 should I choose for the best fit and noise isolation?
Choose the EP-06 BLK with 6 silicone ear tips (S/M/L) and 45° angled nozzles — the multiple sizes and ergonomic design give the best seal and isolation for your ears.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black



