Monoprice Inc.
Monoprice Stage Right XLR Male to 1/4Inch TRS Male Cable 25 Feet 16AWG
Balanced cable connects mixers, microphones and amplifiers with XLR and 1/4-inch TRS plugs, 25 feet long using 16AWG conductors
- TypeKeepsakes
- Balanced XLR to TRS connection for pro audio gear
- 25‑foot length gives flexible stage or studio routing
- 16‑AWG conductors deliver strong signal over distance
- Gold‑plated contacts resist corrosion for lasting reliability
- Stage Right series built for demanding live‑sound use
Stage Right Balanced Audio Cable
This Stage Right cable provides a balanced connection between professional audio equipment. It features a 3-pin male XLR connector on one end and a 1/4 inch male TRS plug on the other. The 16AWG construction supports reliable signal transfer for mixers, microphones, and amplifiers. Gold-plated contacts help resist corrosion over extended use.
Upgrade From Unbalanced Or Worn Leads
Replacing unbalanced TS cables or damaged XLR leads with this balanced design reduces noise pickup on longer runs. The 25 foot length suits stage or studio layouts where devices are spaced apart. The jump is worth it when hum or interference appears on existing cables, or when a secure locking XLR connection is required for microphones.
25 Foot Reach With 16AWG Headroom
The 25 foot span comfortably handles connections across typical stage widths or studio rooms without strain. The 16AWG gauge provides sufficient conductor thickness for low-impedance microphone signals and line-level audio over this distance. Very long runs beyond this length may benefit from heavier gauge wire to minimise resistance and signal loss.
Highlights
- Balanced XLR to TRS connection for pro audio gear
- 25‑foot length gives flexible stage or studio routing
- 16‑AWG conductors deliver strong signal over distance
- Gold‑plated contacts resist corrosion for lasting reliability
- Stage Right series built for demanding live‑sound use
Specifications
| Type | Keepsakes |
|---|
Questions about this item
What connectors does the 25-foot cable use?
One end has a 3-pin male XLR connector and the other end has a 1/4-inch male TRS plug.
How do I connect this balanced cable correctly?
Plug the XLR end into the mixer or microphone output and the TRS end into the amplifier or interface input, matching signal flow direction.
When should I consider replacing this 16AWG cable?
Replace it if the connectors become loose, the jacket shows cuts or the signal develops noise or intermittent dropouts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
