We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel full-motion TV wall mount with articulated arm extended, showing VESA plate and cable management channels

Monoprice Inc.

Monoprice Inc. 143198 Full-Motion TV Mount 43-90in 132lb VESA 800x400

SKU CH-Y0R3-HP5Z9 MPN 143198

Full-motion wall bracket for 43 to 90 inch flat or curved TVs up to 132 lb with VESA 300x200 to 800x400, swivels 60°, tilts +3° to -15°, rotates ±5°, extends 3.0 to 16.9 inches

  • NameMonoprice Commercial Full Motion TV Wall Mount Bracket For 4
  • Height3.90
  • Width14.00
  • Weight20.16
  • Adjust viewing comfort with 60° side-to-side swivel
  • Tilt screen up 3° or down 15° for glare reduction
  • Extend TV 3.0 to 16.9 inches from wall
  • Supports flat and curved displays 43 to 90 inches
  • Holds up to 132 pounds on VESA 300x200 to 800x400

Full-motion range and TV sizes

The Monoprice 143198 is a full-motion articulating wall mount built for flat and curved televisions from 43 to 90 inches. Its arm extends from 3.0 to 16.9 inches from the wall and swivels up to 60 degrees side-to-side. Tilt adjustment runs from +3 to -15 degrees with a ±5-degree rotation for levelling. The cold-rolled steel construction supports displays up to 132 pounds.

VESA compatibility and installer fit

This bracket fits VESA patterns between 300x200 and 800x400, covering most large-screen models. It suits installers who need deep articulation and built-in cable routing for a clean finish. Buyers with screens smaller than 43 inches or VESA holes outside the 300x200 to 800x400 range should look at a different mount. The 20.16-pound unit requires solid wall anchoring.

132-pound weight capacity

The single specification that decides fit is the 132-pound maximum load. Any television heavier than this limit cannot be mounted safely on the 143198. Confirm the screen weight before purchase; all other adjustments depend on staying within this capacity.

Highlights

  • Adjust viewing comfort with 60° side-to-side swivel
  • Tilt screen up 3° or down 15° for glare reduction
  • Extend TV 3.0 to 16.9 inches from wall
  • Supports flat and curved displays 43 to 90 inches
  • Holds up to 132 pounds on VESA 300x200 to 800x400

Specifications

BrandMonoprice
Model143198
Part Number143198
NameMonoprice Commercial Full Motion TV Wall Mount Bracket For 43" To 90" TVs up to 132lbs, Max VESA 800x400, Fits Curved Screens
Height3.90
Width14.00
Weight20.16
Shipping weight9.14 kg
Package size447 × 356 × 99 mm

Questions about this item

What VESA patterns does the Monoprice 143198 support, and what is the maximum size?

The mount supports VESA patterns from 300x200 up to a maximum of 800x400, covering most 43 to 90 inch flat and curved displays.

What wall structure is required to hold the 132 lb capacity of this Monoprice 143198 mount?

The wall plate measures 14.00 inches wide and must be secured to wood studs or concrete with appropriate heavy-duty hardware to support the 132 pound load.

How do I set the extension range on this Monoprice 143198, and what step is often missed?

Extend the articulating arm between 3.0 and 16.9 inches, then tighten the pivot bolts; the step often missed is adjusting the ±5 degree rotation plate to level the TV before final tightening.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.