We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal clamp base with rubber pads and adjustment knob

Mobotron

Mobotron CC-105 Adjustable Clamp Base for MS 426 526 Mounts

SKU CH-FBG1-8YKGP

Adjustable clamp base secures MS 426 and MS 526 laptop mounts to desks 0.27 in to 2.83 in thick with rubber padding to protect surfaces

  • TypeInstallation Tools
  • Adjustable clamp fits surfaces 0.27 in to 2.83 in thick
  • Rubber padding prevents scratches on desk or table tops
  • Compatible with MS-424, MS-426, MS-524, MS-525F and MS-526 mounts
  • Optional accessory for MS 426 and MS 526 laptop mounting systems
  • Installation tool designed for vehicle laptop mount setups

Clamp Base for MS 426 and MS 526

The Mobotron CC-105 is an adjustable clamp-on mounting base designed as an optional accessory for MS 426 and MS 526 laptop mounting systems. It secures the mount to desks or tables with a thickness ranging from .27 inch to 2.83 inch. Rubber padding protects the mounting surface from scratches. This base suits installers who need a semi-permanent attachment without drilling.

Installation Tools and Surface Protection

The clamp mechanism applies even pressure across the contact area to hold the mount stable during normal vehicle vibration. Rubber pads distribute the clamping force to prevent marring finished surfaces. No power draw or active cooling is involved because the unit is a purely mechanical fastener. Installers who need a quick-release mechanism should note this base uses a manual screw adjustment.

Sustained Load Behaviour and Compatibility

Under continuous road vibration the clamp maintains its grip without slipping when tightened to the specified thickness range. The base is compatible with Mobotron MS-525F, MS-524, MS-526, MS 426 and MS-424 models. It does not fit mounting systems outside this listed range. Builders who require a wider clamping span or a different mounting style will need a separate solution.

Highlights

  • Adjustable clamp fits surfaces 0.27 in to 2.83 in thick
  • Rubber padding prevents scratches on desk or table tops
  • Compatible with MS-424, MS-426, MS-524, MS-525F and MS-526 mounts
  • Optional accessory for MS 426 and MS 526 laptop mounting systems
  • Installation tool designed for vehicle laptop mount setups

Specifications

TypeInstallation Tools

Questions about this item

How do I install the CC-105 clamp base on a desk, and what step is often missed?

Position the clamp jaws over the desk edge between .27 inch and 2.83 inch thick, then tighten the adjustment knob until the rubber padding grips firmly; the step often missed is confirming the rubber pads sit flat before final tightening.

What maintenance will the CC-105 clamp base need over time?

Periodically check the adjustment knob for looseness and wipe the rubber padding clean; if the rubber shows cracks or the clamp no longer holds between .27 inch and 2.83 inch, replace the base.

What is the first limit I will hit when using the CC-105 clamp base continuously with a laptop mount?

The maximum desk thickness of 2.83 inch (7.2 cm) is the first hard limit; exceeding it prevents the clamp from closing securely on MS 426 or MS 526 systems.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.