We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mitsubishi DLP replacement lamp module in black housing with Osram bulb inside

Mitsubishi

Mitsubishi WD-82740 DLP replacement lamp 150/180W 1.0 E22H

SKU CH-RTE9-2E2RA

New DLP replacement lamp with Osram bulb rated 150/180W 1.0 E22H for 6,000 hours

  • TypeProject Lamp
  • Weight0.9990
  • Genuine Osram bulb inside for reliable brightness
  • 150/180W 1.0 E22H lamp matches original spec
  • Pre-assembled housing enables quick tool-free installation
  • 6000-hour rating supports extended viewing sessions
  • 240-day warranty covers early-life failures

Exact Mitsubishi WD-82740 replacement

This new lamp and housing assembly fits the Mitsubishi WD-82740 DLP television. It uses a 150/180W 1.0 E22H bulb rated for 6000 hours. The unit weighs 0.9990 and comes with a 240 day warranty. Home-theatre owners needing a direct OEM swap will find the correct part here.

Replaces a dim or failed original lamp

When the WD-82740 image darkens or the set signals lamp end-of-life, this module restores factory brightness. The jump is worth it once the hour counter approaches the 6000 hour rating or colour accuracy drifts. It is not for owners of other Mitsubishi models or different DLP chassis.

Simple user-level installation

The housing arrives pre-assembled so the old cartridge slides out and the new one seats in its place. No tools beyond a screwdriver are typically required. What usually goes wrong is forgetting to reset the lamp timer in the service menu, which leaves the warning active. Dust on the lens surface can also cause hot spots.

Highlights

  • Genuine Osram bulb inside for reliable brightness
  • 150/180W 1.0 E22H lamp matches original spec
  • Pre-assembled housing enables quick tool-free installation
  • 6000-hour rating supports extended viewing sessions
  • 240-day warranty covers early-life failures

Specifications

BrandMitsubishi
ModelWD-82740-LAMP
Part NumberWD-82740-LAMP
TypeProject Lamp
Weight0.9990

Questions about this item

Will the WD-82740-LAMP housing fit directly into the Mitsubishi WD-82740 TV without extra brackets?

The WD-82740-LAMP is supplied as a complete lamp and housing assembly built for the WD-82740, so it slides into the TV's lamp compartment using the original mounting points.

What is the correct sequence for installing the 150/180W 1.0 E22H lamp module, and which step do installers most often miss?

Power off and unplug the TV, allow cooling, remove the lamp door, release the retaining screws, pull out the old module, insert the new WD-82740-LAMP until the connector seats firmly, re-tighten the screws, replace the door, then reset the lamp timer in the menu — the timer reset is the step most often forgotten.

How many hours is the Osram bulb inside the WD-82740-LAMP rated for, and what indicates it needs replacement?

The lamp carries a 6,000 hour rating; when brightness drops noticeably or the TV displays a lamp-warning message, the module should be replaced.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.