We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular power strip with two outlets and a six-foot cord

MINUTEMAN

MINUTEMAN RPM1521E IP Switched PDU 2-Outlet 15A 5-15P

SKU CH-0CD3-72D5T

IP-switched power strip with two NEMA 5-15R outlets, 15 A breaker and remote on/off control per receptacle

  • Remote power control of individual outlets via built-in web server
  • 12-amp maximum load protected by 15-amp breaker at 120VAC
  • Two NEMA 5-15R receptacles with six-foot cord and 5-15P plug
  • Local LED display shows status at a glance
  • IP-addressable switched PDU for rack or wall mounting

IP Switched PDU for Remote Power Control

The MINUTEMAN RPM1521E is an IP-addressable power distribution unit with two NEMA 5-15R outlets. It lets administrators toggle, reset or cycle power to connected equipment from anywhere using a built-in web server. This unit suits small server closets, network racks or edge sites where physical access is limited.

Thermals, Noise and Power Draw

The PDU operates at 120 VAC with a 15-amp breaker protecting a 12-amp maximum continuous load. It has no internal fans, so it adds no audible noise to the rack environment. Power passes through a six-foot cord ending in a NEMA 5-15P plug for standard North American circuits.

Two Outlets and Local LED Display

Only two receptacles are provided, so the unit cannot serve denser deployments needing more outlets. The front-panel LEDs show local status at a glance, while the remote manager handles individual receptacle control over the network. Buyers who need more outlets should select a higher-density model.

Highlights

  • Remote power control of individual outlets via built-in web server
  • 12-amp maximum load protected by 15-amp breaker at 120VAC
  • Two NEMA 5-15R receptacles with six-foot cord and 5-15P plug
  • Local LED display shows status at a glance
  • IP-addressable switched PDU for rack or wall mounting

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the MINUTEMAN RPM1521E PDU and what step is often missed?

Plug the 6-foot cord into a 120VAC NEMA 5-15R wall receptacle, then connect each device to the two NEMA 5-15R outlets. The step often missed is configuring the built-in web server with a static IP address before mounting the unit.

What maintenance or replacement will the RPM1521E need over time?

The 15-amp breaker protects the 12-amp maximum load; if it trips repeatedly, the breaker itself may need replacement. No user-serviceable parts exist inside the sealed chassis.

What limit appears first when the PDU runs at full load continuously?

The 12-amp maximum continuous load rating is reached before the 15-amp breaker trips, so sustained draws above 12 amps will cause the breaker to open.

More in Home Safety & Security

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.