Minigrip
Minigrip MGRL2P0203 Reclosable Bag 3x2 in 2 mil 1000 pack
Clear, low-density polyethylene bags with zip seals, FDA compliant, packed 1000 per dispenser
- TypeWheelbarrows & Carts
- FDA-compliant for food contact
- Reclosable zip seal keeps contents secure
- 2 mil low-density polyethylene resists punctures
- Dispenser pack holds 1000 bags for high-volume use
- Clear flat-bottom design shows contents at a glance
Minigrip 3x2 in reclosable bag
These clear low-density polyethylene bags measure three inches by two inches with a two-mil thickness and a zip-seal closure. They arrive in a dispenser pack of one thousand units and carry FDA compliance for food-contact applications. The flat-bottom design keeps contents stable during storage or transport.
Replaces loose-wrap and single-use bags
Switching from twist-tied poly bags or taped pouches cuts sealing time and eliminates loose fasteners that fall into parts bins. The zip seal stays closed through repeated opening and closing, so the upgrade pays off when items are accessed daily rather than archived once. Bulk dispenser packaging also reduces re-order frequency for high-throughput stations.
Handles small hardware, fasteners and samples
One thousand bags cover extended runs of screws, O-rings, electronic components or lab specimens without re-stocking. Two-mil film resists punctures from sharp edges but will tear under heavy or sharp loads exceeding the light-duty rating. The three-by-two-inch footprint limits use to parts that fit within the usable length and width.
Highlights
- FDA-compliant for food contact
- Reclosable zip seal keeps contents secure
- 2 mil low-density polyethylene resists punctures
- Dispenser pack holds 1000 bags for high-volume use
- Clear flat-bottom design shows contents at a glance
Specifications
| Brand | MINIGRIP RED LINE |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
What are the exact bag dimensions for the MGRL2P0203 to confirm it fits my parts?
The bags measure 3 inches long by 2 inches wide with a 2 mil thickness, giving a usable interior of 3 by 2 inches.
How do I seal these zip-seal bags so they stay closed during storage?
Press the two interlocking tracks together firmly along the full 3-inch seal length; the most common mistake is leaving a small gap at either end.
When should I replace a bag from this 1000-count pack?
Replace any bag if the zip tracks no longer mesh cleanly, the LDPE film tears, or the white write-on block becomes illegible.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
