MINGYI
MINGYI 9501V 30-pack KN95 home health care respirator
Pack of 30 KN95 respirators with valves meeting GB 2626-2019 standard and 95% filtration
- KN95-rated filtration captures at least 95% of airborne particles
- Adjustable nose clip and soft inner shell give a secure, comfortable fit
- One-way breathing valve lowers exhalation resistance for easier breathing
- Activated-carbon layer helps reduce organic vapours and odours
- 30 individually wrapped masks supplied for extended use
30-Pack KN95 Respirator for Home Use
This 30-piece pack of MINGYI 9501V respirators provides certified KN95 filtration for personal health protection at home. Each mask meets the GB 2626-2019 standard with a filtration rate of not less than 95%. The white, four-layer design includes an activated carbon layer and an independent one-way breathing valve. They are suitable for mechanically generated particles and nuisance-level organic vapours.
Upgrade from Basic Face Coverings
These valve-equipped KN95 respirators replace simple cloth or surgical masks when higher filtration and lower breathing resistance are required. The jump is worth it for tasks involving dust, pesticides, herbicides, fungicides or agricultural chemicals with low vapour pressure. The adjustable noseclip and soft inner shell improve seal and comfort during extended wear compared to loose-fitting alternatives.
Check Fit and Valve Suitability
Before ordering, verify that a respirator with an exhalation valve is permitted in your intended environment, as the valve does not filter outgoing breath. Ensure the universal sizing and adjustable nose wings can achieve a proper seal on the wearer's face. Confirm that protection against oil-based aerosols is not required, as this model is rated for non-oil particles only.
Highlights
- KN95-rated filtration captures at least 95% of airborne particles
- Adjustable nose clip and soft inner shell give a secure, comfortable fit
- One-way breathing valve lowers exhalation resistance for easier breathing
- Activated-carbon layer helps reduce organic vapours and odours
- 30 individually wrapped masks supplied for extended use
Specifications
| Brand | 3M |
|---|
Questions about this item
How do I adjust the noseclip on the 9501V+ mask for a secure fit?
Press the adjustable noseclip firmly against the bridge of your nose and mold it to the shape of your face to help isolate polluted air.
What is the correct way to put on the 9501V+ respirator so the valve works properly?
Hold the mask with the valve facing outward, pull the straps over your head, then mold the noseclip; the one-way valve then reduces breathing resistance during use.
When should I replace a 9501V+ mask from the 30-pack?
Replace the mask when breathing resistance increases noticeably, the mask becomes soiled or damaged, or the seal against your face can no longer be maintained.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
