We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular outdoor radio with integrated flat panel antenna and pole mount bracket

Mimosa Networks

Mimosa Networks B11 11 GHz 1.5 Gbps PtP Backhaul Radio PoE 4x4:4 MIMO access point

SKU CH-KA80-XCA7V

11 GHz point-to-point backhaul radio delivering 1.5 Gbps aggregate throughput with 4x4:4 MIMO, IP67 rugged housing, built-in 2.4 GHz Wi-Fi aiming, and SFP or PoE connectivity

  • Up to 1.5 Gbps aggregate throughput with under 1 ms latency
  • 4×4:4 MIMO OFDM up to 256 QAM for high spectral efficiency
  • Carrier-grade IP67 enclosure withstands harsh outdoor environments
  • Built-in 2.4 GHz Wi-Fi turns a smartphone into a precise aiming tool
  • Covers the full 10.7–11.7 GHz band with single or dual 20/40/80 MHz channels

Carrier-Grade 11 GHz Backhaul Radio

The Mimosa B11 is a point-to-point backhaul radio operating in the 10.7 to 11.7 GHz licensed band. It delivers up to 1.5 Gbps aggregate IP throughput with latency under 1 ms. The IP67 rated enclosure ensures reliable operation in harsh outdoor environments for service providers and enterprise network builders.

Replaces Lower-Capacity Licensed Links

This radio upgrades networks currently limited by narrower channel widths or lower modulation schemes. The jump is justified when a link requires 256 QAM modulation across 20, 40 or 80 MHz channels to achieve multi-gigabit physical layer rates. It also replaces setups lacking dynamic TDMA adaptation for asymmetric traffic patterns throughout the day.

Integrates With SFP Fiber or PoE Deployments

The unit accepts a standard SFP module for direct fiber connectivity or uses a Gigabit PoE port for copper installations. Built-in 2.4 GHz Wi-Fi enables precise antenna aiming via smartphone, removing the need for dedicated alignment tools. The single radio covers the full 10000 to 11700 MHz range, freeing operators from stocking multiple frequency-specific units.

Highlights

  • Up to 1.5 Gbps aggregate throughput with under 1 ms latency
  • 4×4:4 MIMO OFDM up to 256 QAM for high spectral efficiency
  • Carrier-grade IP67 enclosure withstands harsh outdoor environments
  • Built-in 2.4 GHz Wi-Fi turns a smartphone into a precise aiming tool
  • Covers the full 10.7–11.7 GHz band with single or dual 20/40/80 MHz channels

Specifications

No published specifications for this item yet.

Questions about this item

What pole diameter does the IP67-rated B11 radio mount to?

The carrier-grade IP67 enclosure is designed for outdoor pole mounting; the bracket accepts standard mast sizes used in 10.7–11.7 GHz backhaul deployments.

Which step is often missed when aiming the B11 using the built-in 2.4 GHz Wi-Fi?

After connecting a smartphone to the radio's Wi-Fi, you must open the aiming tool in the browser and wait for the real-time signal-level graph to stabilise before locking the mount.

When should the SFP module be swapped if the link is upgraded to fiber?

Replace the copper PoE injector with a compatible SFP transceiver whenever the network design shifts from Gigabit Ethernet to fiber; the radio's SFP cage supports hot-swap insertion.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.