Miller-Smith Equipment
Miller-Smith Equipment 40-175-540 Gas Regulator, Single Stage, CGA-540, 175 psi
Single-stage oxygen regulator with CGA-540 inlet, 175 psi delivery range and 2 in gauges
- TypeWelding Supplies
- Single-stage design gives direct cylinder-to-torch control
- CGA-540 inlet fits standard oxygen cylinders
- 175 psi delivery range covers general-purpose welding
- Brass body with stainless-steel diaphragm resists corrosion
- UL Listed and external relief valve add safety
Miller-Smith Oxygen Regulator CGA-540
This single-stage regulator controls oxygen flow from high-pressure cylinders for general welding tasks. It connects directly to a CGA-540 valve outlet and delivers adjustable pressure up to 175 psi. The brass body and stainless-steel diaphragm resist corrosion in workshop environments.
Brass Body Stainless Diaphragm Construction
A 3.25-inch brass body houses the internal mechanism while a nickel-plated bonnet protects the adjustment assembly. The 2-inch dual gauges display supply pressure up to 4,000 psi and working delivery pressure simultaneously. An external relief valve vents excess pressure automatically for operator safety.
Replaces Worn Single-Stage Units
Upgrading from a damaged or leaking regulator restores precise pressure control for consistent weld quality. The UL-listed design meets standard safety requirements for oxygen service. Buyers needing multi-stage pressure stability or non-oxygen gas compatibility should select a different model.
Highlights
- Single-stage design gives direct cylinder-to-torch control
- CGA-540 inlet fits standard oxygen cylinders
- 175 psi delivery range covers general-purpose welding
- Brass body with stainless-steel diaphragm resists corrosion
- UL Listed and external relief valve add safety
Specifications
| Brand | MILLER ELECTRIC |
|---|---|
| Type | Welding Supplies |
Questions about this item
What delivery pressure does the CGA-540 single-stage regulator cap at in practice?
The single-stage design delivers up to 175 psi outlet pressure from a 3,500 psi maximum inlet, with the supply gauge reading to 4,000 psi.
What outlet fitting and body diameter must the bench or bracket accommodate?
The regulator has a 9/16 in.-18 RH B outlet and a 3.25 in. brass body diameter for mounting clearance.
How is the CGA-540 inlet connected to the cylinder, and what step is often missed?
Thread the CGA-540 nut onto the oxygen cylinder valve, tighten with a wrench, then open the cylinder valve slowly to seat the stainless-steel diaphragm before adjusting the delivery pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
