Miller Enterprises
Miller Enterprises WP-R17FV Air-Cooled Torch Body A-150FVRH Series
Air-cooled TIG torch body rated for 150 A at 60 % duty cycle with built-in gas valve for electrodes from .02 to 1/8 in
- TypeTools
- Air-cooled design simplifies setup and maintenance
- 150 A maximum current handles demanding fabrication tasks
- 60 % duty cycle supports extended welding sessions
- 02 in to 1/8 in electrode range covers fine to heavy work
- Built-in gas valve gives direct flow control at the torch
Miller WP-R17FV Torch Body
The Miller WP-R17FV is an air-cooled TIG torch body rated for a maximum current of 150 A with a 60 percent duty cycle. It accepts electrode diameters ranging from 0.02 in up to 1/8 in and includes a built-in gas valve. The torch suits aerospace, fabrication, food and beverage, maintenance, metal art, petrochemical and shipboard repair work.
Suited for precision TIG tasks needing gas-valve
Welders who require a built-in gas valve for direct flow control at the torch will benefit from this design. It is not intended for applications that demand a higher amperage rating or a liquid-cooled torch body for extended high-heat runs.
Gas valve enables fingertip flow adjustment
The integrated gas valve lets the operator start and stop shielding gas without a foot pedal or remote control. This simplifies setup for field repairs and touch-up work where a separate gas console is impractical. No additional accessories or software are bundled with the torch body.
Highlights
- Air-cooled design simplifies setup and maintenance
- 150 A maximum current handles demanding fabrication tasks
- 60 % duty cycle supports extended welding sessions
- 02 in to 1/8 in electrode range covers fine to heavy work
- Built-in gas valve gives direct flow control at the torch
Specifications
| Type | Tools |
|---|---|
| Brand | MILLER ELECTRIC |
Questions about this item
What power source output and cooling setup does the WP-R17FV torch body require to operate at its 150 A maximum current?
Connect the torch body to a TIG power source capable of delivering up to 150 A and provide compressed shielding gas through the built-in gas valve; the unit is air-cooled so no external water cooler is needed.
Will the A-150FVRH torch body accept the collets and nozzles I already use with older 150 A air-cooled TIG torches?
The torch body uses the A-150 series front-end consumables, so existing 0.02 in to 1/8 in collets, collet bodies and nozzles for that series will fit without modification.
After installation, how can I verify the torch body is functioning correctly at its rated 60 % duty cycle?
Set the power source to 150 A, weld continuously for six minutes within a ten-minute period, and confirm the torch body remains cool enough to handle and that gas flows steadily through the integrated valve throughout the test.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
