Miller Enterprises
Miller Enterprises WP-26 Air-Cooled TIG Torch Body A-200 Series 200 A 60% Duty Cycle
Air-cooled TIG torch body rated 200 A at 60 % duty cycle for A-200 series welders
- TypeTools
- Handles up to 200 A for demanding TIG jobs
- Air-cooled design runs at 60 % duty cycle without water connections
- Rigid neck gives steady control in fabrication and repair work
- Accepts electrodes from .02 in to 5/32 in for wide material range
- Compatible with Dynasty 280, Maxstar 280 and XMT series power sources
Miller WP-26 Torch Body for TIG Welding
The Miller WP-26 is an air-cooled TIG torch body from the A-200 series rated at 200 A with a 60 percent duty cycle. It supports welding processes such as GTAW for fabrication, maintenance, repair, manufacturing, shipbuilding and vocational use. The rigid neck accommodates electrode diameters from 0.02 in up to 5/32 in. No gas valve is included on this torch body.
Check Compatibility With Your Welder Model
Verify that your power source matches the listed compatible models including Dynasty 280, Dynasty 280 DX Multiprocess, Maxstar 280, Maxstar 280 Multiprocess and XMT Series units. Ensure the torch connection style and cooling method suit your existing setup. Confirm the electrode size range meets the requirements of your typical welding applications before ordering.
Suited for Air-Cooled TIG Work at 200 A
This torch body suits welders who need a 200 A air-cooled solution for TIG welding on the supported Miller power sources. It is not for operators who require a water-cooled torch for higher duty cycles or different amperage ratings. Buyers needing a built-in gas valve or a flexible neck should look at other configurations.
Highlights
- Handles up to 200 A for demanding TIG jobs
- Air-cooled design runs at 60 % duty cycle without water connections
- Rigid neck gives steady control in fabrication and repair work
- Accepts electrodes from .02 in to 5/32 in for wide material range
- Compatible with Dynasty 280, Maxstar 280 and XMT series power sources
Specifications
| Brand | MILLER ELECTRIC |
|---|---|
| Type | Tools |
Questions about this item
Does the WP-26 torch body ship with a gas valve already fitted?
The WP-26 body is supplied without a gas valve, so a separate valve kit must be added if foot-pedal or finger-tip gas control is required.
Which A-200 torch body matches a Dynasty 280 or Maxstar 280 running at 200 A?
The WP-26 is rated 200 A at 60 % duty cycle and is listed for Dynasty 280, Dynasty 280 DX Multiprocess, Maxstar 280, Maxstar 280 Multiprocess and XMT Series machines.
What electrode sizes can the WP-26 handle when welding at its 200 A rating?
The torch accepts tungsten from 0.02 in up to 5/32 in diameter, covering the full range needed for 200 A TIG work.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
