Miller Enterprises
Miller Enterprises 907529 Plasma Cutter Inverter Spectrum 375 30 A 110-240 V AC
Cuts aluminium, mild steel and stainless steel up to three-eighths inch thick with a 14-to-30-amp inverter output on 110-to-240-volt single-phase power
- TypeAngle, Pitch & Slope Locators
- Cuts aluminium, mild steel and stainless up to 3/8 in
- Handles material as thin as 1/16 in without warping
- Auto-senses 110-240 V AC single-phase input worldwide
- Inverter design delivers 14-30 A output from 20 A @ 120 V supply
- Model 907529 Spectrum 375 rated for 50/60 Hz operation
Miller Spectrum 375 plasma cutter
The Miller Enterprises 907529 is a 30 A inverter plasma cutter designed for cutting aluminium, mild steel and stainless steel from 1/16 in up to 3/8 in thick. It runs on single-phase input across 110 V to 240 V AC at 50 or 60 Hz, making it suitable for workshop and field use where supply voltage varies.
Capacity and headroom
Maximum output current is 30 A with a minimum cutting current of 14 A, so thin sheet and medium plate up to 3/8 in are within its comfortable range. At 120 V the unit draws 20 A input, limiting duty cycle on the highest settings, while 240 V operation provides more headroom for sustained cuts.
Thermals, noise and power draw
Inverter topology keeps the unit lighter and more efficient than transformer models, reducing heat build-up during normal cutting cycles. Fan noise is present but typical for a 30 A class machine, and power draw scales with output current up to the 20 A input limit at 120 V.
Highlights
- Cuts aluminium, mild steel and stainless up to 3/8 in
- Handles material as thin as 1/16 in without warping
- Auto-senses 110-240 V AC single-phase input worldwide
- Inverter design delivers 14-30 A output from 20 A @ 120 V supply
- Model 907529 Spectrum 375 rated for 50/60 Hz operation
Specifications
| Brand | MILLER ELECTRIC |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
