Miller Enterprises
Miller Enterprises 130831 FasTip Tapered Contact Tip 1/16 PK25
Tapered contact tips for 1/16 in aluminum wire at up to 250 A, compatible with FasTip nozzles and Spoolmatic or XR guns, pack of 25
- TypeWelding Parts & Supplies
- Tapered contact tip fits Miller FasTip nozzles and guns
- Heavy-duty rating supports up to 250 amps maximum current
- Threaded connection works with Spoolmatic 15, 30 and XR series
- Designed for 0.0625 in aluminum wire
- Pack of 25 tips reduces changeover frequency
Miller FasTip Tapered Contact Tip 1/16 PK25
This pack contains 25 tapered contact tips manufactured by Miller Electric for MIG welding guns. They are built to a heavy-duty standard and accept aluminium wire up to 0.0625 inches in diameter. The threaded connection fits Miller FasTip nozzle series and compatible gun models. Welders running aluminium wire at higher amperages will find these tips match the specified 250 ampere rating.
Suited for aluminium MIG work on compatible Miller
These tips are intended for operators using aluminium wire on Miller Spoolmatic 15, Spoolmatic 30, XR-Aluma-Pro or XR-Pistol guns that take FasTip consumables. Shops that primarily weld steel, use a different wire diameter, or run guns with a slip-on tip design should select a different consumable. The heavy-duty rating supports demanding production cycles on the listed equipment.
0.0625 inch maximum wire diameter and 250 A rating
The decisive specification is the 0.0625 inch maximum wire size combined with a 250 ampere duty rating. Only guns and wire feeders configured for this exact wire diameter and current range will operate correctly with these tips. Verify the gun model and wire size before ordering to ensure proper electrical contact and feed performance.
Highlights
- Tapered contact tip fits Miller FasTip nozzles and guns
- Heavy-duty rating supports up to 250 amps maximum current
- Threaded connection works with Spoolmatic 15, 30 and XR series
- Designed for 0.0625 in aluminum wire
- Pack of 25 tips reduces changeover frequency
Specifications
| Brand | MILLER ELECTRIC |
|---|---|
| Type | Welding Parts & Supplies |
Questions about this item
How do I install the FasTip 130831 tip and what step is often missed?
Thread the tapered tip into the FasTip nozzle series until fully seated; the step often missed is verifying the 1/16 inch wire matches the 0.0625 in maximum diameter before welding.
What maintenance or replacement will the 130831 contact tip need later?
Replace the tip when the 0.0625 in bore shows oval wear or when wire feed becomes erratic at the 250 A rating, typically after several spools of aluminum wire.
What limit appears first during sustained use of the FasTip 130831 at 250 A?
The 250 A maximum current rating is the first limit; sustained heavy-duty aluminum welding at this level accelerates tip wear and can cause overheating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
