Miller Enterprises
Miller Enterprises 130831 Drive Roll Dual Groove 0.03 .035 .045 .062 Welding
Dual-groove steel drive roll feeds flux-cored wire from .03 to .047 in for Spoolmate 15, Spoolmate 30, XR-A and XR-W MIG guns
- TypeTraffic & Parking Lot
- Dual-groove design feeds four wire sizes from .03 to .062
- V-knurl steel roll grips flux-cored wire without slipping
- Compatible with Spoolmate 15, 30, XR-A and XR-W guns
- Works with MIG gun models 130831 and 195156
- Includes replacement insulator male connector for quick installation
Drive Roll for Flux-Cored Wire
This Miller Electric drive roll feeds flux-cored wire in compatible MIG guns. It fits Spoolmate 15, Spoolmate 30, XR-A and XR-W models. The V-knurl steel construction grips wire from .03 to .047 in diameter. It includes a replacement insulator male connector.
Suited for Single-Roll Feeders
Welders using flux-cored wire with the listed Spoolmate or XR-series guns will find this roll matches the feeder. Shops running solid wire or using guns outside the 130831 and 195156 compatibility list should look elsewhere. Multi-roll feeders requiring more than one drive roll are not served by this single unit.
Wire Diameter Range .03 to .047 in
The groove profile accepts flux-cored wire no smaller than .03 in and no larger than .047 in. Wire outside this window will not feed reliably through the V-knurl teeth. Confirm your wire size before ordering.
Highlights
- Dual-groove design feeds four wire sizes from .03 to .062
- V-knurl steel roll grips flux-cored wire without slipping
- Compatible with Spoolmate 15, 30, XR-A and XR-W guns
- Works with MIG gun models 130831 and 195156
- Includes replacement insulator male connector for quick installation
Specifications
| Brand | MILLER ELECTRIC |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
Which wire diameter should I pick between .03, .035, .045 and .062?
The roll covers a range from .03 in up to .047 in, so .03, .035 and .045 wires are supported; .062 exceeds the maximum.
What does the V-knurl drive roll do when feeding flux-cored wire?
The V-knurl profile grips the tubular flux-cored wire to prevent slipping and deliver consistent feed through Spoolmate 15, Spoolmate 30, XR-A and XR-W guns.
Which MIG gun models does the 130831 drive roll fit?
It is listed for MIG gun models 130831 and 195156 and works with the Spoolmatic series guns.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
