Miles Lubricants
Miles Lubricants MSF1564008 Compressor Oil 1 gal 30 SAE Grade
Synthetic-blend compressor oil in a 1-gallon bottle, SAE 30 and ISO 100 viscosity grades for rotary compressors
- Synthetic-blend formula protects rotary compressors
- SAE 30 viscosity matches equipment specs
- ISO 100 grade suits high-pressure systems
- 465 °F flash point adds safety margin
- One-gallon bottle covers multiple changes
One-gallon compressor oil for rotary compressors
Miles Lubricants MSF1564008 is a synthetic-blend compressor oil formulated for rotary compressors. The SAE 30 grade and ISO 100 viscosity suit equipment requiring this specific viscosity range. Supplied in a one-gallon bottle, it is intended for maintenance of compatible air compressors and vacuum pumps.
Fits maintenance schedules specifying SAE 30
This oil matches service requirements calling for SAE viscosity grade 30 and ISO viscosity grade 100. The synthetic blend base oil provides the viscosity index of 101 needed for consistent flow. It frees the operator from sourcing separate base stocks when the manual specifies these grades.
Maintains viscosity under sustained operating heat
Viscosity measures 100.1 cSt at 40 °C and 12 cSt at 100 °C, showing stable resistance to thinning during extended run cycles. A flash point of 465 °F indicates high-temperature tolerance for continuous duty. The fluid is not food grade, limiting use to standard industrial rotary compressor applications.
Highlights
- Synthetic-blend formula protects rotary compressors
- SAE 30 viscosity matches equipment specs
- ISO 100 grade suits high-pressure systems
- 465 °F flash point adds safety margin
- One-gallon bottle covers multiple changes
Specifications
| Brand | MILES LUBRICANTS |
|---|
Questions about this item
How hot can the oil get before it reaches its flash point?
The flash point is 465 degrees Fahrenheit, so sustained operation below that temperature keeps the oil from igniting.
Will the synthetic-blend base oil run hotter or cooler than a straight mineral oil in a rotary compressor running all day?
The synthetic blend has a viscosity index of 101 and holds 12 cSt at 100 °C, which resists thinning and helps maintain film strength during continuous duty.
Does the compressor need a specific ISO viscosity grade to use this 1-gallon bottle?
Yes, the oil is ISO VG 100, so the compressor must call for that grade for proper lubrication.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
