Miles Lubricants
Miles Lubricants MSF1554006 Compressor Oil 5 gal Pail SAE 30
Synthetic compressor oil in a five-gallon pail rated SAE 30 with ISO 100 viscosity for rotary compressors
- Synthetic base oil resists breakdown in rotary compressors
- SAE 30 viscosity grade matches compressor manufacturer specs
- ISO 100 viscosity at 40 °C ensures proper film strength
- High 465 °F flash point adds safety margin
- Viscosity index 101 maintains performance across temperature range
Synthetic Compressor Oil for Rotary Compressors
This synthetic compressor oil is formulated for rotary compressors and carries ISO Viscosity Grade 100 with SAE 30 rating. The 5-gallon pail supplies a full change or reserve for industrial and workshop equipment. It is not suited for food-grade applications or compressors that require a different viscosity specification.
Sustained High-Temperature Stability
A viscosity index of 101 indicates consistent thickness across temperature swings, while viscosity measures 100.1 cSt at 40°C and 12 cSt at 100°C. The flash point of 465°F provides a wide safety margin during prolonged duty cycles. These figures reflect steady-state behaviour rather than cold-start performance alone.
Verify Compressor Requirements Before Ordering
Confirm that the manufacturer specifies ISO 100 or SAE 30 synthetic fluid for your rotary compressor model. Ensure the sump capacity matches or is below the 5-gallon volume so the pail covers a complete fill. Food-processing environments and units requiring food-grade lubricant must select an alternative product.
Highlights
- Synthetic base oil resists breakdown in rotary compressors
- SAE 30 viscosity grade matches compressor manufacturer specs
- ISO 100 viscosity at 40 °C ensures proper film strength
- High 465 °F flash point adds safety margin
- Viscosity index 101 maintains performance across temperature range
Specifications
| Brand | MILES LUBRICANTS |
|---|
Questions about this item
Will the 465 °F flash point reduce heat buildup during continuous rotary-compressor operation?
The 465 °F flash point indicates high thermal stability, so the oil resists breakdown and deposit formation during extended runs in rotary compressors.
Do I need a rotary compressor to use this SAE 30 synthetic oil?
This oil is formulated for rotary compressors; it requires a compatible rotary unit and is not intended for other compressor types.
Can I top off my older rotary compressor that currently holds ISO 100 fluid with this 100.1 cSt synthetic oil?
Yes — the 100.1 cSt viscosity at 40 °C matches ISO 100, so it can supplement or replace the existing fluid in compatible rotary compressors.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
