Miles Lubricants
Miles Lubricants MSF1433007 16 oz Gear Oil Bottle 100 ISO Viscosity 85W SAE Yellow
Food-grade synthetic gear oil, ISO 100 and SAE 85W, rated from 15 °F to 180 °F with a 266 °F flash point
- ColorYellow
- Food-grade safety with NSF H1 certification
- Synthetic base oil performs from 15 °F to 180 °F
- Low pour point of -44 °F ensures cold starts
- High Timken OK load of 40 lb resists wear
- 16 oz bottle of ISO 100, 85W SAE gear oil
Product Identity
This is a 16 oz bottle of gear oil with ISO Viscosity Grade 100 and SAE Grade 85W. It uses a synthetic base oil and carries an NSF H-1 food-grade rating. The fluid is intended for equipment that requires a lubricant approved for incidental food contact.
Decisive Specification
The NSF H-1 certification is the single factor that determines suitability. Only systems explicitly requiring a food-grade lubricant should use this product. Standard industrial gearboxes without that requirement will not benefit from this specific formulation.
Sustained-Load Behaviour
The oil operates continuously between 15 and 180 degrees Fahrenheit. A pour point of minus 44 degrees Fahrenheit ensures flow during cold starts. A flash point of 266 degrees Fahrenheit and a Timken OK load of 40 lb confirm thermal stability and film strength under prolonged stress.
Highlights
- Food-grade safety with NSF H1 certification
- Synthetic base oil performs from 15 °F to 180 °F
- Low pour point of -44 °F ensures cold starts
- High Timken OK load of 40 lb resists wear
- 16 oz bottle of ISO 100, 85W SAE gear oil
Specifications
| Brand | MILES LUBRICANTS |
|---|---|
| Color | Yellow |
Questions about this item
How does the 85W SAE grade behave once it is in a real gearbox?
The 85W rating means the oil flows at temperatures down to 15 °F and remains stable up to 180 °F, so it protects gears through cold starts and normal operating heat.
What does the ISO Viscosity Grade 100 cap in practice?
ISO VG 100 sets the kinematic viscosity at 100 mm²/s at 40 °C, defining the oil's resistance to flow and its load-carrying film thickness under typical gear loads.
Will the 16 oz yellow bottle fit the filler neck on my equipment?
The 16 oz bottle has a standard narrow neck that fits most gear-case fill ports; the container weighs 33 lb per case and the pour point is -44 °F for easy cold pouring.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
