Miles Lubricants
Miles Lubricants MSF1433005 100 ISO 85W SAE Gear Oil Yellow
Synthetic gear oil rated ISO 100 and SAE 85W, NSF H1 food-grade with no additives, operating from 15 to 180 degrees Fahrenheit
- ColorYellow
- Food-grade safety with NSF H1 certification
- Synthetic base oil protects gears from 15 °F to 180 °F
- Low pour point of -44 °F ensures cold starts
- High Timken OK load of 40 lb. resists wear
- 100 ISO / 85W SAE viscosity matches heavy-duty specs
Industrial-grade gear lubricant
Miles Lubricants MSF1433005 delivers ISO 100 viscosity and SAE 85W performance in a synthetic base oil. The NSF H1 food-grade rating certifies it for incidental contact in processing environments. Yellow colour aids visual inspection during fill and drain procedures.
Integrates with enclosed gear systems
The 25 lb bottle supplies enough volume for initial fills and top-offs on compatible gearboxes. Synthetic formulation maintains film strength between 15 and 180 degrees Fahrenheit. Pour point of minus 44 degrees Fahrenheit ensures cold-start circulation without external heating.
Ready-to-use formulation
No additives are included, eliminating compatibility guesswork when topping up existing H1 charges. Timken OK load of 40 lb confirms load-carrying capacity under boundary conditions. Flash point of 266 degrees Fahrenheit supports safe handling in high-ambient areas.
Highlights
- Food-grade safety with NSF H1 certification
- Synthetic base oil protects gears from 15 °F to 180 °F
- Low pour point of -44 °F ensures cold starts
- High Timken OK load of 40 lb. resists wear
- 100 ISO / 85W SAE viscosity matches heavy-duty specs
Specifications
| Brand | MILES LUBRICANTS |
|---|---|
| Color | Yellow |
Questions about this item
At what temperature will this gear oil reach its flash point during sustained heavy use?
The flash point is 266 Degrees F, so sustained operation must stay well below that temperature to avoid ignition risk.
How much heat can the oil handle before it exceeds its maximum operating temperature in all-day service?
The maximum operating temperature is 180 Degrees F; running continuously above this limit will degrade the lubricant.
What equipment specifications must my gearbox already meet to use this ISO 100, SAE 85W synthetic oil?
The gearbox must be rated for ISO Viscosity Grade 100 and SAE 85W viscosity, and compatible with synthetic base oil and NSF H1 food-grade requirements.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
